wao, default HT link voltage already can let HT link clock to that high already.
but 2400MHz for HT link, is it stable? usually people didn't push HT link.

you got an awesome chips.

haha, people normally don't get phenom ii X6 for gaming.

haha, yes, phenom ii x6 is good in video transcoding and image rendering.
but i think phenom ii x6 is amd short terms product, because got heard that amd will come out a 8 cores on 2011.

ya, agree to this. its really need relatively high base clock to reach better overclocking.

the 1.380v is the stock vcore right?

stock vcore for deneb C2 and C3 also 1.35v?

i see. looks like the stock vcore don't have a fix voltage, its depend on the every single chips.

undervoltage when load is normal or not normal?

i see. then if the voltage increase abit on load is normal or not normal?

is it for a very good motherboard, the vcore is constant whenever the cpu is idle or in full load?

hey, what is your lowest possible and stable vcore for 2.2GHz?
i also want my cpu run cooler.

i see. will try it later. what is the shortest time for occt test to make sure it is stable?

haha, i see i see. because feel like abit can't wait.

can, but will very lag lo. and once bsod, all work lost..

saw people lap his amd phenom ii x4 940 here:
http://www.overclock.net/amd-cpus/508380-p...tml#post6239770



lapping is just remove the protective nickel layer on top of the cpu only?
why people want lap cpu?

This post has been edited by saturn85: Jun 27 2010, 02:54 AM

can go any further if cpu NB voltage set to 1.20v?