found a new stable low voltage for my 24/7 setting

vcore 1.2v vdrop 1.18v vdroop 1.18v idle 0.8v (this board handle load pretty well)
other voltage is at their stock setting.



will overclock when i get the confidence to.

nb cooler ada mahu jual??

gonna change the pushpin for the nb cooler for a screw and nut and see if that make a difference.

macam kasi bakar je.

orang cakap amik little baby step so

http://valid.canardpc.com/show_oc.php?id=1098604

pakcik ah khoo boleh tolong sourcekan ram sink tak.

saya nak letak di vrm area mobo dan memory gc la.

got this fella from JB selling it.

http://forum.lowyat.net/index.php?showuser=24862

http://valid.canardpc.com/show_oc.php?id=1108650


terima kasih thread overclocking AMD


*now lets see if this is stable*

it bsod when linx-ing

temp 43'c idle and 56'c when it bsod.

i think its too hot.

linx doesnt stress all the time.every time it finished counting the memory then it'll idle and then continue again.not stressful for the whole hour like p95.

but stability is subjective but if it pass 20 run with max available memory i ran p95 small fft aftwerwards just to see if it can pass it.

---

Added on March 30, 2010, 9:32 amthis just in



sadly 4.4ghz is a no go and my ram couldnt do 1600mhz cl7 or maybe im still with the whole limit is 1.65v intel concept.

---

Added on March 30, 2010, 9:33 amhttp://valid.canardpc.com/show_oc.php?id=1109230

This post has been edited by hilmiangah: Mar 30 2010, 09:33 AM

sama macam Intel la begini

ok after this i change my habit to blend instead of small fft.

thank you abang ah khoo.

btw saya dah jumpa ramsink Enzotech tapi price dia

nope

not stable at all too

now its time to overclock with the bus speed instead of playing with the multi.

same thing actually as the basic is the same.

kau salah orang ni

tu si verdict la.

aku ada avatar baru nih.

really need 1.5v ke??

undervolting maybe.

my B55 be is stable at it stock speed with just 1.2v and that make a lot of difference in power usage.

and amd is catching up on Intel power usage now.

my x4 load use less than 70w

waffak

i know that

just playing witcha.

btw i already got the ramsink to cover the vrm area of the mobo but its not gonna fit perfectly la since its the wide type instead of the straight type.



see the wide fin.thats the problem rite there.now gonna look for another type and this one gonna go into the 5770.

dang u guys can stand 8 hr of prime.

i cant even wait for 1 hr.

for me 1 hour passed then its good enough for 24/7

2.6ghz for HT and NB yield me BSOD just now.

from the chart i see that seems the case.still havent got time to properly bench la.