Bro cloudwan already mentioned it.
You can use Everest as well.

-pWs-

tq for the answer. sometime my pc like lacking or hang for like 1 min den it back to normal. at 1st i used win7, i tot it was os prob, now i use xp but still the same thing. do anyone here hv the same issue b4? i dunno wat's the prob. i hope it's not hardware prob

and also the most sensitive to the cpu stress..

so hard to get 3.8GHz!!! i have increase the vcore to 1.425V, HT link 1.8GHz, HTT 2.4GHz still wont survive prime for 10 minutes. will try again tomoro by adjusting cpu bus speed.

bro..how come HTT 2.4ghz ..that is similar to fsb...only 200-300 je
rlek2..some chip might have bad apple also..

200-300 only? default value is 2000MHz rite? or i misunderstand something here?

no..stock is 200mhz...
ht link is 2000mhz now (last time 1000mhz iinm)..
NB freq is 2000mhz..

ok..which one?kekekek

I think his NB freq is 2.4ghz ler.. kekekeke

@azilazwa
Have u tried bumping up the NB-CPU volt? Sometimes this helps in stabling ur HTT oc..

HTT = fsb (default value is 200) rite? then what is HTT in bios (i think max value is 3000MHz, default 2000MHz). HT link is 2000MHz (default), but i reduce it to 1800MHz because i read somewhere it is more stable if lower. this HTT & HT things makes me .

time to consult unker google again.

got different thing eh? u put "that HTT" to 2.4ghz and which part of CPUZ will bekam 2.4ghz? i think that is nb freq... but nb freq not limit to 3000mhz only if BE...hmmm..issat 800series thinggy that new?

Haiz, at last ...

When i play the multiplier = no go
When i up the cpu-vid = no go
When i up the cpu-nb = no go
When i up the cpu-nb vid = no go
When i up/down ht link = no go
When i play the ram timing = no go
When i up the ram vid = no go
And then i so tired wanna give up.
Today so hot i turn on aircond and decrease the temperature to lowest.
Then my hand itchy press prime95, eiii...??? So good wor
Here's the result



Phenom II just love low temperature

hi all.. its my first time here.. i bought phenom 2 x2 555 today.. so i wanted to overclock it which i already did, to 3.5 ghz..
i didnt want to OC more since im a "24 hours pc on" type..

so what i want to know is what is the safe temperature for this proc, for 24 hours run (more time idling)? i tried google it, well, some say 60-70.. im kinda skeptical =_=

ive been keeping it around 50, is it safe?
im using stock fan btw, putting it on 80% of the maximum rpm using amd overdrive..

Thank you for the replies guys.Really appreciate it.

And what about this one guys,recommended? AMD Processsor

I have a thought if getting one unit a try.

It is good processor given if you have AM2+ ACC based motherboard.
Get the Model:AD5000ODJ22GI Core:CACVC Revision:AC Date:0937 Stepping:DPMW/DPNW/DPOW:
RM260 "Guarantee Unlocked & Fully Tested"

You have free X4 in cheap price,but do let us know your motherboard.

may i give u some opinion?
indeed that quad is cheap..but the multi is too low..
u hard to get it run at high speed...no future proof also...2nd hand 550BE that unlocked might be selling around 300 at GS.. just add few more bucks.

---

Added on May 18, 2010, 8:10 amenable CnQ.will helps u alot...50c is safe...dont worry much...and if possible decrease the volt..since u using stock heatsink

This post has been edited by kuntawakaw: May 18 2010, 08:10 AM

I would have to agree with kunta with this, a lil bit more can get u a 555 that can be use for both AM2+ & AM3 mobo.. Plus its a C3 stepping somemore..

BTW kunta, sure is a lot of 555 users in this thread nowadays, 955 users like me and verdict are getting extinct

yeah...555BE go to new one..since unlock rate is high..if used 555BE used will be more expensive compared to new that not confirm can unlock ( i think)..

me using 4000+ x2..im the one of my kind lol..all extinct already

better go for athlonII x3 rana .. or phenomII 555

this processor . not frontward compatible with newer board .
you are stuck with AM2+ with it

This post has been edited by fcuk90: May 18 2010, 09:09 AM

great job there mate... u've made biostar fans like me proud... now who need those premium boards like ch3 to reach 4.0GHz prime stable...

personally, i'd like to keep everything below 55'C on load, but ~60'c still acceptable, especially for d chip. 80% rpm on stock amd fan, ermm... i can't stand it tbh...

get a cheapo but decent cooler like hyper 212+, it can handle x2 temp very well...

me usin e2160 lagi worst leh...

i wouldn't go for rana/propus if i were to aim for high clock, these chips are more meant for end users who will run their chips @ stock/mildly clocked. i believe bro ocz doesn't belong to the mentioned group.

This post has been edited by ah_khoo: May 18 2010, 09:25 AM

the success rate to unlock P2 555 so high, so far never heard got ppl fail to unlock . this might be a good option , but it is still a gamble