bad news...
Sauce  :/angry:  :/furious:  :/cry:  :/(  :/x

imo they wanna clear out all d 955 & 965 1st, else no one would wanna buy d 2 models mentioned. imagine, even priced @ same range (bar d possibility of gettin d other 2 cores unlocked), 960t @ x4 offers much better mileage, not forgettin d turbo core function which do d oc for those ppl who are lazy to oc 'emselves. athlon x4 are decent but more for end users only. tweaker/overclocker will always prefer deneb/thuban... 

hi all got question about ACC function..
is it tweaking the % value in ACC function will help to get more mhz in oc?

just bought sekehen mobo biostar TA790GXE 128M haha.the bios 080014 seem can't unlock my BE7750+.

any guys use this board for unlock?

aik?? 870 & 880G board edi out?

woah....it's sound like urban legend

Thanks guys for the giga info!

BTW i want to let you guys know that i had an pelvis injury and already had my surgery going on 29/april and a piece of titanium were located inside my pelvis.

now im become cycborg, half human half machine.

a speedy recovery & happy besday sis!!!  :/dob:  :/xmas: 
wrong bro, sis verdict should buy a thuban & rape it instead playin w/ d same rig... dah la boring pasal xleh kerje, main ngan same chip over & over again pulak... 

@ocz
1: athlonII dont have l3 cache
2: yes if they have locked cores that quite healthy
3: athlonII x2 is regor chip..cant unlock at all.. x3 might be deneb, or propus..can be unlock..

@azilazwa
use hwmonitor tmpin..but giga famous for the not so accurate cpu temp.. keke..

kekeke..tamaw bg taw since he not asking about OC..just unlock..kekeke
yeah..most propus n regor almost reach limit around 3.7 on air..right?

hi everyone, i would like to know which core temp monitor software can read my current rig cpu temp? i tried core temp and real temp, ntg works. u guys' answers r appreciated. thx

no..stock is 200mhz...
ht link is 2000mhz now (last time 1000mhz iinm)..
NB freq is 2000mhz..

ok..which one?kekekek

may i give u some opinion?
indeed that quad is cheap..but the multi is too low..
u hard to get it run at high speed...no future proof also...2nd hand 550BE that unlocked might be selling around 300 at GS.. just add few more bucks.

---

Added on May 18, 2010, 8:10 am
enable CnQ.will helps u alot...50c is safe...dont worry much...and if possible decrease the volt..since u using stock heatsink

Im using dark knight. Highest temperature 70c under stress prime95, idle temperature 41c. With 3 heat pipe the cooler cant handle stress very well, might wanna change to 5 pipes or more. Any recommendation ???
So far 3 hours prime, didnt continue coz electric bill increasing.

megaburgershadow better lah bro... or venomous x ke?  :/hehe:  :/drool:  :/P

can give suggestion to me ah bro? need some advice... say if u were to choose between gaygay 870a-ud3 or asus m4a88td-v evo, which one will u choose? 

my humble opinion for d 2:

870a-ud3
pros: award bios, nice look, can't be wrong w/ oc.
cons: NOT being a full sized atx, no bios for x6 yet (not a concern thou)

m4a88td-v evo:
pros: sexy look, full sized atx
cons: well, that ami bios & bein a mid range asus board usually means mediocre in oc

pls help me to help my fren to decide...  :/P

I just found out one thing that if i enable CnQ my cpu will bsod.
If disable it, nothing happen. (except temperature not looking good)
Ya, might change it if upgrade to hexacore, my cpu batch 1003GPMW
From what i found online, tuniq extreme is 5 heat pipe direct touch   and for megahelems which is 6 heatpipe non direct touch.
I guess heatpipe direct touch would be more advantages is it ? Correct me if im wrong...
Personally i prefer heatpipe direct touch coz it really difference a lot.

thx mate... 
not until that extant, but @ 80% it's gonna be quite noisy...  :/sweat:
880g is just a 870 w/ igp. my fren considerin it coz he hates non full sized matx board, painful to d eye if put into his tj-09...  :/P

it's more of look vs look issue, oc wise we all know who's d winner rite... just checked d evo manual, all voltages are available w/ very small increment, not a bad thing to have but again, asus mid range boards are known to be mediocre... certain risks involved here...  :/unsure:

gaygay @ $195, evo @ $22x... $2x for better look + igp (heck care) + risk for bein a lemon board... dilemma....  :/help:

read my previous post, i wan the best bang for the buck

wasnt tryin to be rude, just dun want to just spend unwisely coz 1st time wan to learn OC, need to wisely choose the mobo for my proc

well, if i'm d one i'd thank d person for d suggestion & remind bout d budget nicely instead of postin your kindly reply. best bang for buck is 790gx a3+ for ddr3. 

sengkek of the bucks.. kira duit sendiri la beli..

very budget mobo paired w/ highest end deneb sure is not a perfect match. d problem w/ very budget mobo like c45 is d pwm. voltage @ mild oc still manageable, but @ high volt @ high clock, d pwm will have problems copin w/ u throw @ 'em. i've tried whackin 1.5~1.6v on g45, guess what i hear? screamin mosfets...  :/lol:
precisely bro... best bang for buck is subjective to thickness of wallet & d chip. for instant, we can't say g45/c45 is d best bang for buck if one own a 965BE, at least go for 790gx chipset ma... if propus/rana/regor then diff story. i'd say 770 chipset based mobo is still ok, even u put these chips into 790fx they won't do wonder... thou for sure better than budget boards...  :/)

kawan i dah decide... buat mase ni member x bagi taw board ape die pilih...  :/lol:

if possible mlm ni/besok i go over his place to help him post results... but be warned, chip cikai is in use...  :/(

my lil bro wan it sooo bad
i like bling2from crosshair iii
and crosshair iv not as blink as crosshair iii
how bout GA-890FXA-UD5?
avail in mlysia ke?

ok, if i just wanna start OCing wif my current rig, the 965BE n the 770-C45 mobo, where do i start? so noob :/( which guide shud i follow 1st?

who know if ud5 is cheaper
iinm, crosshair iv cheaper thn ud7 rite?