Hi everyone..i nid ask sometihng...i'm using kingston 667mhz CL5 2Gb value ram..I setting FSB:DRAM from 667mhz to 1066mhz with timing 6-6-6-30 and add voltage 2.0.. Izzit it call overclock memory? sorry..noob here ^^

yes..u can check u'r current ram speed with CPU-Z

http://www.cpuid.com/cpuz.php

Oh ic,thx for ur information and cpu-z

it's a must have software for any OCers

Do have any software can detech current using memory voltage ?

that one depends on the motherboard software itself.

---

Added on March 8, 2010, 9:46 ambut i think everest might work.

This post has been edited by hilmiangah: Mar 8 2010, 09:46 AM

but my can't work....

it depend on your motherboard chipset. most of the low and mid end or even some highend board dont have the chip now for cost saving, so everest cant detect it.

IF my motherboard moidel is DKA790GX platinum ?

AMD Overdrive can see, and set oso

This post has been edited by InFe_eD: Mar 9 2010, 01:42 AM

I try first....thx for the information...

you are using kingston value ram 2GB DDR2 667?

can overclock to DDR2 1066 6-6-6-30 at 2.0v?

Ya i'm using kingston value ram 2GB DDR2 667


I set it in bios 1066mhz with timing 6-6-6-15 12 at 1.8v and test with memtest pass!!

wah, what chips your ram using?

can show some cpuz picture?

My chips ram using Qimonda



Here my pic

your value ram act like performance ram..

Not really, sure it's running 1066 but the timing is too loose at cl6...
I bet a 800mhz 4-4-4-12 will perform better.

CAS6 is kinda loose.
Try run 4-4-4-12 @ 800MHz or 5-5-5-15 @1066Mhz.

wow, then TS may have to try both settings, see weather which is perform better?

Agree with you sir, the method TS using is simple oc, slide adjustment oni.

Try to play with FSB/HTT and see the diff!