woww ace mei mei .. is it you're grabbing another good batch of i7 this time? hahahha most normal batch of i7 920 cannot do that with air cooling solution man.. the temperature is damn high using air cooler solution

i just finished doing a pc setup to a friend using this thermalright venomous-X in push-pull configurations. The result is not bad on o'cing intel i3.

This post has been edited by kInOzAwA: Mar 12 2010, 05:44 AM

don't worry as long as the pull after the push config facing outake fan at the back of the case, the air will go out smoothly but you may also look on the outake fan's CFM, 'coz it also affect the whole air flowing.

it's better if you have a higher CFM fan as outtake, as this will remove any excess of air from the pull setup. By making a push-pull it will generate more excess of air to the outtake fan. If the outtake fan is somewhat lower, the air will trap inside the case but if there's any top outtake fan available, you need no worry since this outtake fan will help to remove the excess of hot air out from the case.