I need to have a good starting base before l fine tune my panel to suit my environment. So far I've been looking around and found close to nothing so I would like some help from some sifus or owners to help me maximize the PQ and black levels.

This is the only setting I found:

Picture Modes
Picture Mode : Movie
Color Temperature : Warm 2
Aspect Ratio : 16:9

Picture Settings
Cell Light : 5
Contrast : 95
Brightness : 54
Sharpness : 20
Color : 48
Tint : G51/R49

Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off
Gamma : -2
Color Space : Native
White Balance : Factory Default
Fleshtone : 0
Edge Enhancement : Off
XVYCC Color : Off

Picture Options
Color Tone : Warm 2
Size : 16:9
Digital NR : Medium
HDMI Black Level : Low
Film Mode : Off
Blue Only Mode : Off
Screen Burn Protection : Factory Default

Anyone care to share their settings?

This post has been edited by DemonTweakZ: Feb 24 2010, 04:23 PM

Wait for taikor Anfieldude.

Unfortunately, I have yet to calibrate a 6 series plasma, so I cannot advise.

How about calibrating mine?
For free la...

any advive to calibrate for toshiba zv600e?

I read around about calibrating plasma tvs but I don't know a whole lot about it. Can someone give me a brief intro about calibration?

Fine tuning the tv settings to optimize its PQ for best viewing

Calibration is about tuning your display to meet a certain standard. In order to do it properly you will need equipment like test discs/patterns, software and a meter. You can't do it by eye. Lastly, the more controls or parameters you can adjust within your display the better.

Do some reading on the Internet about display calibration and you will learn more about it.

This post has been edited by jchong: Feb 26 2010, 09:10 AM

Without equipment, you can only do contrast and brightness. With proper equipment + lots of reading, you can do greyscale and CMS.