http://www.xigmatek.com/index.php

After couple day browsing through "Casing & Modification" thread I notice that, there is none for XIGMATEK Chasis yet.
The company has produce few Chasis for consumer to choose from; "Midgard, Asgard & current latest is Utgard series.

I bought mine couple day before CNY Festival: (actually my intention was to get myself a Lancool Dragon Lord K62) browsing through Low Yat & Imbi Plaza, my eye caught the UTGARD series displaying @ one of Famous Imbi Retailer shop. After a brief of discussion with the sale personnel & giving me the chances to fiddling & peek the inner side of the chasis, I decided to get one for myself.

here goes;








XIGMATEK Philosophy is I.C.E = Impressive | Creative | Essential

My chasis came with pre-installed 2 x 12cm (front & rear) orange white led fan & 1 x 17cm (top) orange white led fan.
To compliment the chasis I got my self 2 x 12cm CM Green led fans (90cfm). The Front I/O panel came with 2 E-sata, 4 USB, Audio in/out & 2 knobs Fan controller.
Xigmatek also provide 4 water pipes hole for Liquid cooling for this chasis. Screw less tooling for 5.25' bay & expansion slot installation.

-The 2 Knobs Fan controller " in writting based from the Xigmatek site" is RPM speed control knobs for six fans. Even so, the 2nd Knobs (B knobs) I just can't make it work, perhaps its faulty.
-The so called screw less tooling for expansion slot, I slot in my ATI Radeon 4650 its seems unstable, even after fiddling with for almost 15 minutes, its just doesn't seems to grasp solid & stable. so I decided to screw it with a small nut rather than used the palstic clip holder.

Other than that, the case seems pretty much ok, the airflow are good & the case are rock solid steady. (its weight 9.3Kg tho)

Sorry for the picture quality tho, I haven't get my Digital Camera yet (still lurking for one tho).
Don't mind the cacing tho, I'm too lazy to do cable management.

Reviews:
CLICKS HERE

CLICKS HERE

CLICKS HERE

Video






Source from bit-tech.net
So Guy & Gals, please share your Xigmatek Chasis here, perhaps we could discuss & improve our Rigs in future & pimp your rig!

This post has been edited by beast921: Apr 29 2011, 12:01 AM


Attached thumbnail(s)

Love your case

xigmatek case has some taste too,i love it

Thanks bro. We also can discuss about anything in regard of the case too. UTGARD series also provide spacious place on top of the chasis for water cooling rad. Later tonite I will snap a picture.



This post has been edited by beast921: Feb 26 2010, 08:15 PM

currently using Xigmatek Asgard

Xigmatek User mind snapping pictures & show us "your pimp rig"

ok
coming soon....

fast fast!!

i want to see it

looks like CM storm scout without handles..... but sexy too.......

actually there a xigmatek club but at Hardware section.

http://forum.lowyat.net/index.php?showtopic=1068643&hl=

my rig








the black ven slot is taken from CM Sniper

nice ... mind telling us , how is the airflow?...
what fans u using to compliment your chasis? I love the Blue & Black Theme.

I notice u have dual GFX inside your chasis, how the temp.

This post has been edited by beast921: Feb 23 2010, 06:50 PM

erm, the front intake is using xigmatek fan that bundled with it
and the blue LED fan is from CM 120mm
the air flow, so far so good

my main GC is GTX260 temp is around 55 Celsius degree when load
and 2nd GC which is 8600GT will be hotter,i dunno why . temp about 50 to 60 Celsius

---

Added on February 23, 2010, 8:09 pmanyway
TS, what CPU cooler are u using now?
mind to tell us?

This post has been edited by happyfamily: Feb 23 2010, 08:09 PM

my CPU cooler actually is DeepCool Killer Whale, the Original Fan Rubber Damper that hold the fan, damage due to my Carelessness.
So I replace the actual fan with CM 12cm 90CFM.

Currently I unlock & mildly overclocked my cpu with Vcore 1.425 and my Viper running at 5-5-5-12 at 1.9v@1008Mhz.


cpu fan constant running @1800RPM & my (rear exhaust fan running @1800rpm also) "the power tab at probeII indicator"
the temp u can see @ the screen shot of the probeII

nice things u have there

thanks bro, am also upadting the first post, with some added pics.

This post has been edited by beast921: Feb 27 2010, 02:25 AM

wow
very nice

---

Added on February 27, 2010, 5:19 pmwhy dont u put 2 x 120mm fan on top instead of 1?

This post has been edited by happyfamily: Feb 27 2010, 05:19 PM

yeah... the top exhaust fan its 17cm with 600RPM only, in future will do as your suggest, thanks for the suggestion

17cm?
looks small....

Nice, plan to change to utgard from midgard also, more convenient since I place my pc on the floor =X

if you dont mind posting your Midgard Chasis picture, before u swap to UTGARD series