Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

News Official TM High Speed Broadband (HSBB) Thread V2, TM HSBB Launching Live Now !

views
     
sheep
post Mar 19 2010, 10:12 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(0110 @ Mar 18 2010, 09:30 AM)
I've been testing HSBB for 1 month already.
Does anyone else have this problem with their router+modem?

My wired connection is perfectly fine.
But the problem is wireless. It is quite unstable. The wireless network can't be detected sometimes. (From all the laptops in the house)
Does anyone else have this problem?
*
I also have a DIR-615 it is working fine...

Please check if:
1. If your Wireless SSID is hidden.

2. If your wireless channel is located on channel 13. If so adjust it back to 11 and below and try again.
If that solve your issue.


Added on March 19, 2010, 10:21 am
QUOTE(heng84 @ Mar 18 2010, 01:28 PM)
i used to have this problem.. due to the stupid router tmnet give..
anyway.. there is a setting u can make .. took me few hours to find out lol..
there is a setting in advance mode for wireless.. where the default setting is (20/40hz)
change the setting to 20hz then u r done.. thats for my case la (now im at office cant guide u but give u a rough guide la haha)..  my router is like 10meters away from my pc.. last time can connect but cannot get into internet because of that.. now solved.. somehow the router is pahria.. ping not so stable and cannot modify the antenna cos cannot take out.. one piece one knn..
*
I think that you are using the 802.11b/g device (11~54Mbps)

for that you really need to disable the 20/40Mhz wide channel implementation.
Backword compatilibity on 802.11n -> 802.11a/b/g


Added on March 19, 2010, 10:22 am
QUOTE(poh880 @ Mar 18 2010, 01:41 PM)
Even DLink Retail DIR-615 also unstable bcos the firmware have bugs. My DIR-655 also just fine after their released firmware version 1.33NA. Hope TM will work with DLink to always update their custom firmware as well.


Added on March 18, 2010, 1:46 pm
In 20Hz, you will get half of the maximum rate which will be 150M. In 40Hz, you will get 300M. It is only applied to wireless N. Wireless G users will get 54M. The problem is wireless get reboot by itself for an unknown reason.
*
Er??
You sure?

That have no happen to me though.
What is the firmware version you have on your DIR-615



This post has been edited by sheep: Mar 19 2010, 10:22 AM
sheep
post Mar 19 2010, 11:06 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(amy_n_juss @ Mar 19 2010, 10:53 AM)
yes, yes, same here.
i have the exact problems and i thought it's because of the laptop.
after some time, it will just disconnected from the internet.
*
What is your firmware version?
sheep
post Mar 21 2010, 02:37 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(heng84 @ Mar 20 2010, 10:28 PM)
im using N punya usb router...i need to switch back to 20hz in order to get more stable connection.. or else will be like shyt cant even connect to the router 192 168 0 1
now ok la.. much better but ping stilll spike up and down.. but much better than before ler.. ping timeout all the time.. then only 1 or 2 lines got respond.
*
What is the device model that you are using?
sheep
post Mar 22 2010, 09:59 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(heng84 @ Mar 21 2010, 12:04 PM)
oi not enough sleep// haha i mean wireless N usb stick la. aztech sorry mny bad
*
Hum...

Try to use the wireless without that "Stick" and see if the problem gone...
sheep
post Mar 22 2010, 10:34 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(+Newbie+ @ Mar 22 2010, 10:14 AM)
Well, for those using the Dlink DIR-615 Wireless N router and experiencing sudden disconnects, where your wifi status still shows connected, but you get page errors on everything including 192.168.0.1, I tried switching the router mode from b/g/n -> b/g and so far so good. *crosses fingers*
*
Just wonder...
Your wireless adaptor is it 802.11n or it is a b/g type?


sheep
post Mar 22 2010, 10:37 AM

Casual
***
Junior Member
338 posts

Joined: Nov 2005
QUOTE(Demonic Wrath @ Mar 22 2010, 10:34 AM)
Hmm, I'm using DIR-615 too but I don't experience that problem. I'm using it for Streamyx though.
*
The 2 Box is totally different smile.gif

So not the same.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0168sec    1.30    7 queries    GZIP Disabled
Time is now: 27th November 2025 - 05:04 AM