still waiting for prd.core.00 hack..dat time we can advance port..maybe..haha


guys rite now n97 widget have been extracted..waiting for implementation...good luck for them (hackers)

This post has been edited by DunkyKung: Feb 11 2010, 03:14 PM

i dont know what i have done,now i just flashing my phone,phone flashing done.but icant on my phone..what happen?

---

Added on February 11, 2010, 3:41 pmhelp me!!i cant open my phone..how i can revive my phone back?

This post has been edited by apecx92: Feb 11 2010, 03:41 PM

1. After u click refurbish any error / messages appeared? or it starts flashing automatically?
2. After finish flashing, wat was the final message?

1.maybe..but it start auto
2.my flashing done

but i cant on my phone,is there anyway to revive my phone?

take out battery, wait 2 or 3 minutes, put back battery .. DONT TURN ON! but straight away do hard reset

i cant turn on,when i turn on it vibrate,just that all..no more..how to revive back?

i never ask u to turn on, forget about revive ..

1. Take out battery, wait 2 or 3 minutes
2. Put back battery .. DONT TURN ON! but straight away do hard reset

do above 1st

same thing just happen to me..about 1 minutes ago, but i manage to revive it using JAF, i tink my prob is cable error, while flashing it suddenly stop, error cant send data..haiz...its good dat im lucky tis day..when on it just vibrate...dam cap ayam cable rm10 cable..now ok ady..


hey did u do hard reset??green + red + cam button, hold it and press on, hold until got nokia sound

This post has been edited by DunkyKung: Feb 11 2010, 03:57 PM

press the green red cam and power button?done still the same..

reflash it with ori firmware and c how..if not working try JAF..

http://forum.dailymobile.se/index.php/topic,1792.0.html


a bit advice from me..its a bit harder koz u need to emulate JAF box using pkey..so read a few time before proceding..

This post has been edited by DunkyKung: Feb 11 2010, 04:02 PM

plug in back do the same method of flashing, when u wanna click refurbish in Phoenix, see up there got 1 USB Dead Flash button, tick it the click Refurbish

hhmm icant tick the dead flash button..why?

xm just now why my screen when press at 1 it detect at 3, done calibration but still same..after flash everything fine now..just wondering what the cause...is my lcd dying?

1. U can successfully scan the product?
2. if flashing this firmware fails again use the original firmware

please take screenshot of any messages, also ure flashing screen i wanna see

1.i cant scan the product
2.now u sing ori

Moving Permanently Internet Browser Cache to Memory Card

This modification will make Nokia 5800XM browser to cache in E:\Sys\Cache

- The C:\System\Cache remains empty and this saves space too.
- Download and put the attached 101F8557.txt in C:\Private\10202be9
- Change the file attribute of 101F8557.txt to "READ ONLY"
- Delete 101F8557.cre in C:\Private\10202be9\persist if exist.
- Restart your phone.

Open the internal Nokia browser and surf some web sites, observe now it caches to E:\Sys\Cache. It also create new file called 101f8557.cre in persist folder, leave it there.

Now C:\System\Cache will be empty forever and saves C drive space (You may delete the Cache folder permanently).

Download: http://www.1filesharing.com/download/9JOFRBJB/101F8557_1.txt

Also added in General Tips and Tricks III

This post has been edited by Xploit Machine: Feb 11 2010, 04:47 PM

ok cn update d, using NSU

ramblow giving frequent restart after hacking my phone... is there any other app to replace ramblow??

how about Killme???

i wonder how many times can we flash our firmware
btw using jaf is better than phoenix , never brick my phone using it