ok confirm liao, thanks alot.

guys, i just wanna know, flying sites in malaysia, they are using mostly mode 1 or mode 2?

what i know sifu yap using mode 1.

i know QiW using mode 2, what about the rest?

This post has been edited by sLapshock: Apr 22 2010, 12:05 AM

heard in dunia rcfrom the guy name mohiz who personally played sifu yap heli he says sifu yap using mode 1...

haha

so malaysia field using mode 1 or mode 2?

true lar, its matter of preference.

for me,im used to mode 1, but mode 2 is easier to control coz my right hand reflex slightly faster, but i cant control the left rudder, always thrttle up when im trying to rudder...

why are you suffering in mode 1?

well, in mode 1 i use both thumb and index for my throttle/roll

and just a thumb for my pitch/yaw

its easier that wayi think...

---

Added on April 22, 2010, 11:45 amGUYS HELP ME WITH AEROFLYPRO DELUXE

It seems that i can only fly piccolo, the rest of the helicopter all go haywire eventhough i setup the control properly...

wtf is vtail, mixtail, taileron?

stressman.

anyone who use can post me ur conf. using esky 0404???

This post has been edited by sLapshock: Apr 22 2010, 11:45 AM

ok nevermind anyway do i need to dismantle the whole lama to adjust the servo? any shortcut???

---

Added on April 22, 2010, 3:45 pmthats my servo arms but it lookslike my swash plate level..hmm how to correct this



This post has been edited by sLapshock: Apr 22 2010, 03:45 PM

guys, now my lama drift to the left side in a half circular motion...

could it be the inner shaft???

thanks.

i see, but what i meant was its does not rudder/yaw but its drift in circular motion, but only to the left side (nose out)...

also, my lama v3 doesnt hover without me inputting the throttle anymore, it either lift up or lift down if i let go the throttle..

unless i control the throttle up and down then it stays, once i let go... it will lift up...or if i bring down 1 click it goes down...

any idea?

i seee....

guys i just bought lipo batt checker, my FULLY CHARGED 3s is this


esky
No1:4.10
no2:4.18
All:8.29v

this is the chart that i saw somewhere on forum.

1S1P 2S1P 3S1P 4S1P 5S1P 6S1P
100% 4.20 8.40 12.60 16.80 21.00 25.20
90% 4.15 8.3 12.45 16.60 20.75 24.90
80% 4.10 8.20 12.30 16.40 20.50 24.60
60% 4.00 8.00 12.00 16.00 20.00 24.00
40% 3.90 7.80 11.70 15.60 19.50 23.40
20% 3.80 7.60 11.40 15.20 19.00 22.80
10% 3.70 7.40 11.10 14.80 18.50 22.20


so does that means my batt fully charged is about 95%?

also, what is the voltage that i can never go lesser? lesser than 3.0v izzit for lipo?

eh mine is 2S?

its 800mah leh... u mean the esky batt is 2s lah ea?

wanted to ask what happened if i go flybarless with lama?

This post has been edited by sLapshock: Apr 23 2010, 07:03 PM

guys any review for mini titan e325?

its cheap in singapore.

trex 450 sport only $350 (kit only)

just went to rotor hobby at singapore, damn the esky parts are 50% cheaper if i compared to rcdreamz etc.

xtreme blades are only selling $4 there for a pair.

graffiti hobby are selling at rm29 per pair (yea thats the one i bought)

rcdreamz selling at rm18.

---

Added on April 24, 2010, 12:32 pmguys what do u think about this?

http://shop.rotor.com.sg/show-detail.asp?p...C85B91F13}&pn=1

This post has been edited by sLapshock: Apr 24 2010, 12:32 PM

this one mini titan only cost SGD350++

thats CHEAP.

yeap complete with electronics.

http://shop.rotor.com.sg/show-detail.asp?p...C85B91F13}&pn=1

90% assembled ARTF.

only need tx and lipo.
the shop i went to alot mini titan parts.
i dont know ar cheap or not, i stay in JB but the 2 shop that i went in singapore rotor hobby and rce hobby sell alot of esky, align and mini titan.

wait.

ALOT.

definately cheap than the shop that i saw at JB dont if i you can find any cheaper than the one i saw, if yes then intro me

rcdreamz definately more expensive.

TREX 450 sport kit sell for SGD350. kit only.

cheap?

welcome to singapore

This post has been edited by sLapshock: Apr 24 2010, 07:41 PM

i see..!! intro me cheap shop lah..hahah!

anyway i found this --

http://rcehobby.com/product_info.php?cPath=1&products_id=584

i know about mymegastation, its cheap but useless coz ALWAYS OUT OF STOCK.

rcsmart not really cheap la, i mean the parts, not sure about the rest.

so how much is the latest SE v2?

but i can say lama v3 selling cheap in singapore..haha.

coz that heli less people buy.

look at their lama v3, from 2months ago (when i dont even know what is coaxial are) until now that i know how the gyro works...

they still "BACK ORDER"

call again.

BACK ORDER.

saw at rcdreamz website, RM40 expensive than previously stated but IN STOCK.

called mymegastation.

BACK ORDER.

still.

haha.

wtf?

anw dont think getting trex for my first 6ch, i read alotand does a comparison between titan and trex.

from what i read, from what i read la at rcuniverse and heliguru (from those who owns and fly both models)

trex won because of the availability of parts and their steel kit and it is much more agile, thats about it.

why im getting a mini titan is.

1.its harder to get a goreng pisang than titan parts in singapore

2.very durable plastic and much more stability due to the heavier size for a NOOB like me.

3.alot of people reccomend me titan than trex for beginner.

but what i know its a downgrade if u get miniT if u play trex

This post has been edited by sLapshock: Apr 25 2010, 09:36 AM

Walkera servo die off already?
Did you crash or electronics error?

anyway yeap, i go singapore everyday so i might as well get the parts there.

any comments on newer or older version?

i love the trex 450, even on realflight ican pretty well hover the trex, but trex is too agile for me...

as for mini titan i heard it much more stable and easier to hover with...

maybe a titan first, and trex when im confident with myself...

i saw titan se ARTF @ 2200+++ AT RCDREAMZ... so eexpensive meh!

just now i got poison by the guy at rjaerosport, he said titan is good, but allplastic, for what?

haha