Just like QiW said... is like decorative... you can remove it...
But for 450... is best to keep the tail support on as the tail boom is longer...

Result:
You can DIY your own "fin" just to keep the tail boom on

tail boom supports helps alot in holding the boom more solid and preventing vibrations ... thats the main purpose of the supports
the fin u can put or not ... it is ok ... will no affect anything

Based on what I searched, there was a guy saying the same as he did not find any differences flying his BCP with or without the horizontal fin.
With every crash, the blade tends to bang on this plastic part and cracks it.

Alamak, I put some super glue on my training kit to glue the plastic joint and the stick together. A day after that I found my plastic joint a bit brittle and with a little force, it breaks apart maybe because of the chemical reaction ...... what else can I use to glue it up??

super glue @ CA may cause some harm to certain plastics
i normally use EPOXY RESIN unless i am sure the material i am using CA on can take it ...
u can still try to put some epoxy on that joint and see if it helps .. those 2 tube mix together ones will do .. get the 15min epox and not the 5min ones coz its harder and stronger once its cured
the 5mins ones normally ppl use for on site repairs where they need instant fix quick but not as strong laaa

Almost 1 month and my RX for 4G6 is yet to be seen...
but the LVBooster which i ordered last week had reached my doorstep~

Where did you ordered your parts?
Have you paid?
Sounds not good if keep you waited too long.

1 month is way too long for any overseas commercial order
i have once bought some 4g3 stuff from another forummer in NETHERLANDS and i got at my doorstep in less than 2 weeks ...

actually the ar6300 is available at rcsmart ... but expensively marked up at rm290 laa ... since online prices only show it at usd50 .. hehehe

the ar6110/6100 vs the ar6300 is only 3-4gm difference ... but its the connectors that create the prob .. only the ar6300 has those micro JST connectors

watch the connectors though ... i think i read somewhere the walkera ones have signal in the middle cable instead of power in the middle as used generally by mainstream brands ... never hurt to check coz plugging it in without checking may just fry your rx .. hahahaha

ps .. which esky gyro are u using again ?? the 0704A or B ?? or PRO ??
the PRO is a rate gyro ... not HH

This post has been edited by QiW: Apr 1 2010, 05:05 PM

just got poisoned by my officemate...
he bring his small heli to office today and ask me to play it...
damn it was fun to steer heli than my drift car...arghhhh
i was thinking on selling my car and buying nice heli rather than small one...hehe
so i browse d net and found out about lama v3...
is it cool for super beginners like me??
and where is d best place to buy it...and whats d cheapest price for this RTR kit??tq

I'll used back the gyro from RX2609 which could be power up by 1s. RCsmart markup the price too much la... almost can buy 2 units~

Aiyoyo, the WK2801 can use on RealFlight but the axis not so correct one ... a bit hard to configure to make it works but one thing I notice is, it is more realistic than using reflex .......

The same thing I notice on my 4G6 also, where the servo horn won't move back to the centre after left/right rudder ..... headache
What to do ar? Change the settings in the Tx?

This post has been edited by daddoo: Apr 1 2010, 10:37 PM

lama v3/v4 is a very good way to get heli poison .. hehehehe
it is very ez to learn .. stable .. cheap .. but it cannot handle much wind in stock form unless u spend $$$ to mod it
google mymegastation .. they offering very good price

---

Added on April 1, 2010, 10:55 pmfor HH rudder the servo will not go back to centre after u give it input laaa
it will move itself as u move the heli
if u want it to go back to its ori position everytime after u give it input then fly in rate mode .. hehehehe

i oso find realflight much more realistic than reflex .. but this one all personal preference la
as for axis not correct .. u can go into realflight menu to set your axis accordingly lorrr ... dont do anything to your tx

---

Added on April 1, 2010, 10:57 pmrm290 ... not really can buy 2 ar6300 ... but can buy at least 1.5 ar6300 lorr .. hahaahahahaa
which site did u order your ar6300 from ??

This post has been edited by QiW: Apr 1 2010, 10:57 PM

I bought from ebay, had log a dispute against it. So, the payment will be held till i received it.

---

Added on April 2, 2010, 10:25 amdaddoo, QiW had mentioned about your "problem" which is normal.

You can try read the pdf which i posted last time regarding Head Hold Gyro Vs Rated Gyro.

This post has been edited by cliffang83: Apr 2 2010, 10:25 AM

Guys, please help tomorrow im going down KL.

I called mymegastation and rcsmart both said that the lama v3 is not in stock, do you guys know any other place that you can provide phone number to call, i wanna check if have stock.

You can call, Graffiti Hobby(try google) located 6th floor of BTS.

HI GUYS,

i called graffiti hobby, its RM210 for Esky Lama v3(non-2.4ghz)

Asked you guys, is the 2.4ghz really necessary, say im only playing at my house area.

does it affect the perfomrance?

2.4 is not necessary unless u fly with group of fliers or if your area of flying is prone to alot of EMF intereference (telco towers power station etc etc)
does not affect performance of the heli itself ..

errr...power station is 500metre away... does it affect?

As long as you are closer enough to your heli... it should be fine...

thanks bro. cant wait to get it tomorrow.

What are the parameters you guys usually will touch in the Tx? For example, D/R, exponential.
D/R is the percentage to determine how much travel of the servo will throw, so if you set it to max then the servo angle will move to max.
Expo is the percentage to determine to sensitivity of the stick around the centre. The more you put for expo the less sensitive of the servo movement when you move the stick by a little bit.
Am I getting it right?

---

Added on April 2, 2010, 1:04 pmI was really thinking that this is a problem. Read up about the HH and Rated and understood the term but don't really know that in HH the servo travel will not go back to centre
Generally HH is more recommended to beginner as the head will be held by the gyro.

This post has been edited by daddoo: Apr 2 2010, 01:04 PM