rilek bro, im not rich like you. my budget nice2 for rc.

ye la tuuu!! i settle with JR PROPO

my jr propo is not using dsm2, im using DSMJ technology which use the frequency hoping same like FAAST the only downside is.... it is as expensive as Futaba receiver and not spektrum compatible...

DSMJ ?? then u are safe .. for both helis and planes
DSMJ rx are not that expensive .. in KL can get the 6 channel ones for around rm220-230 ... not much more than the DSM2 versions
the last i asked 2-3 months ago la that price .. 7 channel is rm320 i think



yeah, DSMJ.

Bro sure anot RM320!??

u always give price got sell here sell there but never tell the shop, i saw rcsmart RM390 leh for RD731.

DSMJ 6 CHANNEL is not in the market yet, except in singapore (rotor hobby)

so, since u said have, WHEREE???? coz i wanna buy....

thank you, looking foward for your worth reply.

power! dont worry, singapore fireman very different.. we dont tangkap ular, we everyday panjat turun tangga 12 tingkat sampai nak pengsan! (singapore semua rumah pangsa maa)

activation time from fire station to fireground is 8minutes (later than that, u will have to write a statement)

response time from wherever you are (even tengah pangsai) to drive out the fireengine from firestation is 1minute (later than that, statement again)

minimum performance indicator to set up the first water jet to the fire is 3minutes (later than than, statement...again)

so dont worry! your house terbakar... no hal punya, i can help *touch wood*

---

Added on July 9, 2010, 11:25 amalamakbrudder.... rd631 sold out...but yes its cheap... 220. thank you thank you

This post has been edited by sLapshock: Jul 9 2010, 11:25 AM

Singapore fireman la brudder, bombaman in malaysia catch snake only!

define.. WELL PAID!???

haaha

---

Added on July 9, 2010, 5:42 pmQiW, are RC366 reliable?wanna order many stuff from them...

This post has been edited by sLapshock: Jul 9 2010, 05:42 PM

daddoo..may i add trex 450 pro and trex 250...aiyah..bonus comin ar..once a year only....

yah man...shit. actually quite regret into rc hobby... but... WHO CARES!

---

Added on July 9, 2010, 8:04 pmmy bike 1 year never service. who cares?
my soap havent top up. who cares?
my jeans all worn out. who cares?

but if my heli cant fly, DAMN CANT SLEEEP!

This post has been edited by sLapshock: Jul 9 2010, 08:04 PM

hope notinto planes..


















any soon.

guys, frm wht i see, only zhnme, qiw, daddoo and sometimes cliffang are active. Wht happen to the rest?

if my tail got binding when i full rudder left and right..wht should i do?

Full set Trex 450 Pro will all spare parts, screw drivers, plier, charger, etc for

Giving up Trex 450 Pro Super Combo full set for. Crash minor only affect blades and gear and changed. Comes will remaining spare parts.

Front Drive Gear Set for T-REX 450 Pro
Torque Tube Rear Drive Gear Set for T-REX 450 Pro
Carbon Stabilizer
Flybar Rod, Steel, 1pc
Main Shaft for T-REX 450 Pro, 1 pc

JR DSX7 $320 with lanyard, hook and stand.

Balancing Charger for 3 - 6 cell bought 2 weeks back - $80

New Spare Items
Torque Tube for T-REX 450 Pro - $10

Metal Head Stopper for T-REX 450 Pro - $4

Feathering Shaft for T-REX 450 Pro / Sport - $8

Fuselage Parts for T-REX 450 Pro - $6

Metal Tail Holder Set for T-REX 450 Pro - $20

Torque Tube Bearing Holder for T-REX 450 Pro - $8

Gorilla gear Trex 450 PRO Yellow - $20

KBDD 450 Neon Yellow Paddles - $12

KBDD 450 Pro Tail Blades - Neon Yellow 61mm - $5

Upgrade to Futaba GY520 and Futaba servo,

KDE Direct bling bling tail servo aluminum holder and anti rotation bracket.

4 batteries to go. 2 norm 30C and 2 ACE Power 35C.

Whole set plus many spare, maintenance kit etc etc to give away.

Got extra 7 channel receiver unused too with tons of accessories, spare parts.

Canomod canopy



ehem. its mine

This post has been edited by sLapshock: Jul 12 2010, 06:10 AM

nope. just bought it. hahaha!

---

Added on July 12, 2010, 8:40 amSelling my futaba 6ex 2.4ghz with receiver for rm450....

This post has been edited by sLapshock: Jul 12 2010, 08:40 AM

hahaha.. have yet to fly it. i will see how. the reason i say torque tube is not expensive is because of shop.heliguru.sg, if not i wont bother! haha!

NO HARD LANDINGS!

---

Added on July 12, 2010, 10:10 amQiW, asked you, rd731 comes with extension right, can i play without the extension?

This post has been edited by sLapshock: Jul 12 2010, 10:10 AM

Izzit? Hahaha.. nevermind la, i sell in singapore only, less trouble some.

QiW, i wanna ask you something, you use DX7 last time right, at the servo travel screen, i notice that, most of my servo is not at the neutral position, and when i fully let say aileron.. to the left.. it will only go up to 40%, and aileron to the right will go 50%..

how do i make every in neutral?

saya ada RD631 receiver, dan rd731 receiver, i notice rd731 didnt come with EA131...currently the trex pro i bought using rd631 + ea131..

so can i use rd631 without using ea131 and use rd731 with ea131 for my scale heli?

pls advise.

is there any videos on how to bind jr tx and rx? unlike futaba..jr leceh sial

if let say mine is already bind, but i want to rebind?

basically..

plug the bind plug into the batt/bind channel
connect batt to esc > esc to any channel
then turn on?

---

Added on July 12, 2010, 2:58 pmand also izzit really safe to rebind the rd631 without the sattelite on my trex 450 pro?

This post has been edited by sLapshock: Jul 12 2010, 02:58 PM

Alright, will do.

QiW, think you need to help with me. This are my settings, and i think i need your advise regarding this. Just say, i want 3D with -12,0,+12 as min/max pitch.

[D/R & EXP]
All 100%


[AUTO D/R EXP]
NORM INH
ST-1 INH
ST-2 INH
HOLD INH


[REVERSING SW]
(all in order, i checked)


[TRAVEL ADJUST]
All 100%


[THRO HOLD] OFF
HOLD POS. -5.0%
SW: RUDD D/R


[THRO CURVE]
NORM: L:0.0% 1:36.5% 2:66.0% 3:84.5% H:100.0% EXP OFF (im not sure abt what is this)
ST-1: 95, 90,85,90,95 EXP OFF
ST-2:100,100,100,100,100 EXP OFF


[PITCH CURVE]
NORM: 37,INH,70,INH,100
ST-1: 0,INH,50,INH,100
ST-2:100,100,100,100,100 <--- ERRR??????? i dont know preset was like that...... shd i change to??
HOLD EXP OFF <-- NOT SURE what is the fourth menu under pitch curve funtion


[REVO MIX[
ALL 0%


[PROG MIX,1,2,3[
ALL INH


[TIMER]
DOWN-T: 4:00


[THRO CUT]
INH


UNDER SERVO TRAVEL SCREEN, all is not neutral, and as if i add expo and dual rate, dont understand this part.


[SWASH MIX]
3 SERVOS
120DEG
EXP INH
AILE -50, ELEV 50, PIT. 50

---

Added on July 12, 2010, 3:37 pmi forgot to say, i really inspired by zhnme bukit jelutong video. damn nice la bro, i like the style, hopefully can be like that one day. anyway, if u know any guy name WILLIAM fly at bukit jelutong too? he use trex 450 sport with 6ex futaba

This post has been edited by sLapshock: Jul 12 2010, 03:37 PM

so garang.......................