thank you sifu QiW.

i really appreciate it. anyway i finally can hover already after 2 days of intense practice.

regarding the wobbling, my lama didnt wobble when i apply throttle but when its start to wobble whenever i apply aileron or elevator during flying.. do u know why is this so?

---

Added on April 6, 2010, 7:28 pmforget to mentioned that i alrady loosen the blades, as in the blade is not tight at all.

This post has been edited by sLapshock: Apr 6 2010, 07:28 PM

nope.
im using my index and thumb to hold the stick (both sides)

i can fly the lama now, throttle up is not a problem just that when i start to apply aileron or elevator, my lama will wobblewhile hoovering.

i did not really understand how to check the blade problems of etc, can you guys list out a checklist anything that i have to check?

servos is the white colour thing with afew small holes sticking out at both side of the heli right just right behind the canopy?

it is the one the move up and down whenever i apply aileron or elevator, right?

yeap..i remember i adjusted it using hand to make90degrees...

servo horns or servo arms?

hi cliffang83

thank you. i downloaded and read, i think it would be good if all this copied to the first page and the very first post. just my humble suggestion.

anyway i settle the wobble problem, its somehow fix itself i guess?

now i have problem with my battery compartment on my lama, everytime i land the battery will came out.

Guys, do anyone know anyway that i can use my Aerofly Professional Deluxe with my Esky 0404 Tx?

i tried calibrating but, my laptop detect but the aerofly didnt.
yes it came with crack + starflight addonn.

I also flying alone, im here in JB .. no friend flying.

argh. just installed and cracked RFG4, and it says my graphic card unable to render 3d .

I wonder if RFG3.5 possible to install on my old laptop (celeron)

damn. i cant even hover it proper on realflight sim... hmmm....how long do you guys usually take?

im using right throttle.

Darn..does that mean i would shorten the lifespan of my esky 0404?

Awww!

Also the problem using the Tx is it drains the battery man, everynight i have to recharge!

Hmmm. Should i buy the usb powered Tx?

takpalah, kat sana tak active ar macam kat sini. ppl like QiW and you have been so informative to me, sorry but im sucking out knowledge from you guys (appreciate my honesty yeah? )

anw... just broke my lama v3 tail! ordering flexi tail and extended shaft once i got back from langkawi this wednesday.

nak tanya, you guys using what heli ea?

damn just crashed my heli hard until the canopy kemek! haha. shit man! i cant play in small room..iwill panick!

seems like 4g6 a good choice ea?

anyway, just to ask... how to adjust the servo that both arms is at 90deg...now my lama v3 the right side is 70deg like that... not 90deg..when all my trimming point on tx is at the center...

how do i adjust that, coz everytime i plug out, and use hand adjust..it readjust itself....

guys,

is it normal that esky setting will lari one?

because everytime i set nice nice (adjust the prop), after play, then after i recharge the setting lari back.

also, how do i adjust my servo to be both 90degrees? because now the right sideof my heli is 75deg from the main shaft, i need to adjust the trimming to proper it back. if my aileron trim in the center, it will get back to 80deg from main shaft.

Thanks QiW, regarding the servo adjusting did you mean

1.turn on tx and plug in batt on the heli
2.set the elevator and aileron trim to the center
3.plug out the inner shaft B (the shaft that connecting swash plate and servo horns)
4.force servo horns to be both 90 degrees ("force" because when i plugged the batt on heli its a bit hard to push up or push down)

would that damage the servo?

also, another thing..i dont know why, but my aileron nose are moving up and down at times even i didnt touch the tx (the chit chit sound) as theservo nose is moving a little up and down. it didnt stay calm, but it happen at times not everytime.

oh ok, i got that.

i did tried force once or twice, but its really hard.

anyway since QiW mentioned that its not necessary to make sure the servo horns are both at 90deg from main shaft, then i think i wont bother it.

what i mean as setting nice nice is, yes, i did adjust the proprtion and gain (tho i didnt see that my gain has any effect?) and set it until that my esky hover without me even touching the Tx, but then after i recharge and play back..i need to readjust again.

for another question, it seems that after i change to the new blades, my top blades spins '1clicked' faster than my bottom blades, how do i adjust this?

1click*= the throttle when u pushed up can feel this 'clicked' feeling.

errr...if im getting a new servo, i should just get the aileron servo right?

---

Added on April 15, 2010, 8:08 amhttp://www.rcdreamz.com.my/webshaper/store/viewProd.asp?pkProductItem=251

servo not that expensive la haha.

ok beb back by lunch, got to be in singapore for a bit.

This post has been edited by sLapshock: Apr 15 2010, 08:08 AM

rm15 for a servo. erm, care to share bro?

but can the 9g be used on esky lama v3?

ok, here's my confusion. on my lama v3 manual, it said the gain is to control the tail wobbling while the prop is to control the rudder.

on rcheli forum i read that it say otherwise, which is which?

i dont know why, when i adjust the gain, my rudder when horribly wrong.

---

Added on April 15, 2010, 5:09 pmok this is my finding (just played with prop and gain) it seems that when i fully tigtened my prop, it will stay fix without ruddering right or left.. is that normal?

This post has been edited by sLapshock: Apr 15 2010, 05:09 PM