encounter some glitch, after overclocking
|
|
 Jan 9 2010, 02:11 PM
Return to original view | Post
#1
|
 
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned   
|
What psu you're using ? True power ?
Take a look at the E7xxx OC Thread and learn how to OC, it seems that you have rather limited knowledge in OC. So my suggestion is to read and learn from basic. While ocing take note on the temperatures, voltages and ram timing. |
|
|
Jan 9 2010, 02:23 PM
Return to original view | Post
#2
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
There's your initial problem, its the PSU. Change to a better true power PSU from reputable brand, try to get higher wattage PSU and if possible get those single fat 12v rail PSU.
|
|
|
Jan 10 2010, 11:18 PM
Return to original view | Post
#3
|
|
Senior Member
6,744 posts Joined: Jan 2003 From: World Wide Web Status: Banned
|
QUOTE(gnush85 @ Jan 10 2010, 01:01 AM) i wonder if you can change the FSB:DRAM ratio, mine cant Get ur facts right, extreme power psu are not "true" power psu. Get those real power or true power psu, usually those psu retails more than rm200  for ratio, you can ignore for that since your overclock not really far enough but if the ratio is 2:3, you cant really overclock much since your ram is just value series(same as mine, lol and what i did is i force the ram to run below the frequency then overclock it, success overclock over 3.1GHz from 2.53, but doesn't score good in memory benchmark )the value ram will cause problem(reboot/BSOD) if the frequencies overclocked near 500Mhzx2(1000Mhz) extreme power 500w is enough  QUOTE(SeNnDoh-7 @ Jan 10 2010, 08:13 PM) hurm..quite clear there What do u mean by "what's the difference using various way to oc ?" ..started to think my psu is the main prob..however..it's still confusing me why it's ok when i oced using gigabyte et and not ok if using bios?..  ..will, run stress test after this(oc using et n stress using prime95)..stay tune folks..  Added on January 10, 2010, 8:14 pmgnush85: fsb:dram ration i oso cannot change..  Added on January 10, 2010, 8:16 pmarghhh:...fedup..what's the difference using varios way to oc?... By bios or in windows ? Is that it ? Bios overclocking is much better, overclocking in windows is not recommended as the value set by the software might not be accurate. For now, get a better PSU first. |
| Change to: |  0.0168sec
 0.71
 6 queries
 GZIP Disabled
Time is now: 9th December 2025 - 07:39 PM |
Quote