just do 'auto 1 hour test'. temp monitoring set to 90C and u're good to go.

usually i just set the temp setting then pick auto 1 hour test. lazy to check other setting

definetly prime 95
2nd choice OCCT

baru nak type...

ok~OCCT pass at auto mode~1 hour

SuperPI is not CPU stressing program.. its for calculating the ram

run OCCT stress test with 490x9.0 without any error


but just now surfing web~my comp auto restart..

any solution

Heavy test ke bro ?

both software are goood,bt i prefer prime95.
frm ma experience ;
test wit occt -always stable
prime95 -usually one core failed,huhu

u mean with large data set??

because i just choose auto 1 hour test~

1. run memtest at least 30 minute
2. run prime95 with small fft.

memtest done~~no error

small fft~take how long? 1 hour?? and priority 1 or 10?

10 hour can ensure total stability. actually, 24hour for total stability.

3@4 hour is enough to know if ur system is stable or not. usually, b4 go to sleep i'll run prime. (when change some setting la)

need tick "round off checking" or not?

i didnt bother to tick it. just open and run small fft.