PDP-428XG Jusco...very expensive...Rm8888..still available..
IF can find in Senq its RM4XXX based on a members feedback.

PDP508XG Senq...goes for RM9XXX...not sure now...

resolution too low. 1024x768... paying for 786k pixels feels shortchanged vs normal FullHD 2.07million pixels..

Here you go.

http://www.hlk2u.com/Plasma-TV-42-PIONEER-...=876&doit=order

Just buy one unit. I want it too. RM4399. Still cant decide if i should get this kuro or samsung LED. But i love the kuro.Always been a plasma fan....

Hope you enjoy it.

yes if course important, or else why watch 2million pixel full HD BDs? just watch normal DVds if resolution is not a concern.. and way cheaper too.. 

Here you go.

http://www.hlk2u.com/Plasma-TV-42-PIONEER-...=876&doit=order

Just buy one unit. I want it too. RM4399. Still cant decide if i should get this kuro or samsung LED. But i love the kuro.Always been a plasma fan....

Hope you enjoy it.

Desa HT sells 508XG at 8800 and KRP500A at RM13K. For 428XG, it's been discontinued but if you still can get new at RM4.5K or less, grab it. I paid full price at RM6999 more than a year ago. The picture is just phenomenal for 42inch considering it's rez is only 1024x768. It's still better looking than most FulHD plasma today. Flagship AV in Kepong has full range Kuros and gives best deal also.

Display unit or not, oklaaa. Even not full HD, its fantastic. i want one myself.

Bro Demon, it is better to bring yr favourite disc to test out @ yr normal viewing distance.  Let yr eyes to decide.  Do take note S10, G10 & 428/508 are different league lo... also the price...

i now have pana g10..superb plasma for the price..4.5k..u'll get deep black depth n very good motion handling..n natural color..here in penang still can find pioneer 428xg..last time the price was 4599..for me..as for now..i think it is best to go for pana 42g10..if u can wait sometime..around 4 months time..pana will release new LED LCD TV..

G10 does not reach the black levels of the 428. Nor does it have the colour accuracy of the 428. Another area where the 428 is better is the availibility of the 9 point gamma correction for better overall greyscale and gamma.

I believe the G10 and the 428 are pretty close in Lumens/Watt technology, however the G10 is slightly higher in that aspect since it was newer.

Resolution wise of course the G10 is Full HD vs 428 which is only 1024X768.

Will u notice the resolution difference, only u can tell. Ur viewing distance of 6ft comes into the territory of where u shd see the difference.

However, in my opinion on a 42in set, the pixels are already very close to each other, some people will not see a difference on moving pictures. On static images, difference will be there, again depending on how observant u r.

On ar188 comment, on scaling artefacts, I have not seen them on actual Blu Ray content but on actual test patterns it can be observed, albeit subtlely. There is no actual jagged edges, however, on 1080p test patterns, there are instances of loss of resolution.

I have also found that in my case to reduce the artefacts due to downscaling on test patterns, being able to output 720p from a capable Blu Ray player reduces these instances. Again, it does not seem to matter when viewing actual HD material, especially since the 428 is capable of accepting 1080p/24Hz and reproducing it at 72Hz. This is an area that I am not sure if the G addresses.

All in all, the decision is urs. In my opinion, if it is a 50in set, I think Full HD is important, on a 42in set, resolution is not the no 1 issue as the pixels are pretty close together. However, people differ in what they see and hear, and some people are more sensitive to things than others. So I would suggest u taking ur favourite Blu Ray Disc and get them to test it on both the sets and view it from ur viewing distance.

If u r going for the LX, might as well go for the KRP-500, I believe is around 13k. I doubt u can get a LX below RM10k.

Bro Demon, with Dark Knight, you shall appreciate the dark scenes.

Why not 508XG?  The resolution is higher at 1365 x 768, but still not a Full HD.

I don't think you can calibrate the color for S10 and G10.  If you are serious about color accuracy, you should consider those TV with CMS.

I own the 428 and the 600M. I have calibrated numerous S10s, X10s (C10) and played around with a G10. I have not calibrated a G10 so am unsure of the true potential. However, I have seen teh calibrated numbers of a THX enabled G10 and I know that the differences between that and the S10 are not too much, except that it has better black levels. Asian G series does not have THX, so the only difference is increased levels of gradiation (different panel) and better blacks due to a mixture of panel and AR coating.

The V and the Z series have more accurate colours.

The 2010 V series will be the one to match the Kuros.

Estimate how much for 50inch one? 

SenQ is selling 508XG for RM7999 (Display set), calar a bit here n there on the plastic cover.  No problem on the panel since its made of glass  .  New set at Harvey for RM8999.  If you don't mind about Display set, you can save RM1k 

I believe Pioneer wanted to clear all old model since their new Flagship Full HD plasma oledi in the market. 

Anothing thing, the 508XG contrast spec is 16000:1 whereas the current Plasma oledi in millions:1.  Is the latter one inflated no or different test mode? 

Watch out, there seems to be many display sets out there.

Do u know how to check the hours? Else PM I will let u know.