Try changing the Wi-Fi channel. For internet wi-fi it should be using channel 6 or 11. Look at the manufacturer manual (if any). If you cannot change the one on the aem link, change the one on your wi-fi router. I read somewhere what channels are for specific use to avoid interferences.

Btw, I also using AEM (wired) with my current astro. will get b.yond sometime next week, but wonder if the current remote will work with AEM considering the main tv will be using b.yond remote. Anyone done this yet can share? Or do I have to get another b.yond remote (which is useless considering the second tv will not be using HDMI - no HD).

---

Added on February 26, 2010, 4:17 pmI am having this same problem. I just bought a AEM 8002 (AV to RF Converter) which uses PAL / BG at Channel 3>
The AV-RF is not faulty cos I've tested it with a DVD Player and works fine. Only when I connect it to Astro B.yond decoder then this happens. My connection is

B.YOND --> RCA Out AV (Red,White Yellow) -----> AEM8002 ------> RF Out ----->TV.
I don' think its the cable or anything cos it works fine with the DVD.
Auto tuning the TV also did not solve the problem.

My signal is ok at 255 so it should not be a prob.

Can some one help me out?



This post has been edited by izz70: Feb 26 2010, 04:17 PM

I saw this ad. very funny if you look at the specs

Transmit audio and video signal

* 433MHz IR extender to remote control AV products ( Sometime O.K. can use remote, some time K.O )

Sometime KO. LOL!

My AEM AV to RF converter doesn't work with my b.yond but works well with my dvd player so I can't return it to the shop and say that its faulty.


This thing doesn't seem to work with me cos I don't get clear picture at all and very noisy audio. The AEM AV to RF is on Channel 3 right? Btw, do I need to attached a booster to the AEM thing to get clearer signal?

This post has been edited by izz70: Mar 4 2010, 08:58 AM

I have finally bought a new converter that works but I can't get the AEM X-Tra Link to work cos I dunno where to point the small thing on the decoder.
Can someone help me please?