hi all,
anyone connected the byond decoder to the avr via hdmi and having switching problem? I get 3-4 times switching problem if I swiched off the avr and use hdmi bypass.
Astro B.yond V2.0, HD Content Available
|
|
 Jan 11 2010, 12:49 PM
Return to original view | Post
#1
|
 
Junior Member
76 posts Joined: Apr 2008 
|
|
Quote|
|
|
|
|
Jan 11 2010, 03:26 PM
Return to original view | Post
#2
|
|
Junior Member
76 posts Joined: Apr 2008
|
QUOTE(maja_5365 @ Jan 11 2010, 02:51 PM) U mean switch off or standby mode?U hv to put it in standby mode to use the hdmi bypass.Btw what avr u using. The AVR is put in standby mode. AVR will bypass the video from decoder direct to plasma. The tv will switch one time normally but when for astro byond, it is more than 1 time. There was 1 time it happened 3 times and there was no picture after that. I have to off and on the decoder. I am using onkyo 607. |
|
|
Jan 11 2010, 05:29 PM
Return to original view | Post
#3
|
|
Junior Member
76 posts Joined: Apr 2008
|
QUOTE(azri @ Jan 11 2010, 04:48 PM) Maybe it's specific to onkyo setup? maybe better luck at the onkyo thread. thanks to all.However I can report that my setup works fine. It's one time switch and that's it. Never had any issue. Byond decoder > Sony HT-SF360 > Pana 42PS10K All on HDMI In fact I'm connecting 3 things to the HT - PS3, WD Live and Byond. It is only astro byond that i am having problem. I dont face this problem with my pc or my dvd player. >>>> found the culprit, is the hdmi cable that came with the decoder having problem. I changed to other hdmi cable solved all my headache. Bad quality hdmi cable from astro!   This post has been edited by oimeng: Jan 15 2010, 12:56 PM |
|
|
Jan 15 2010, 05:15 PM
Return to original view | Post
#4
|
|
Junior Member
76 posts Joined: Apr 2008
|
anyone knows how to reboot the decoder besides powering off the decoder? Thanks.
|
|
|
Jan 17 2010, 12:04 AM
Return to original view | Post
#5
|
|
Junior Member
76 posts Joined: Apr 2008
|
QUOTE(robinctv @ Jan 16 2010, 10:58 PM) i'm using sony tv n sony ht, tv volume n ht volume work after i press power n vol+. me too, having the same problem. i'm using panny btw.but my prolem is, i off tv using astro byond remote, the tv will automaticly switch av to tv, so when i off tv, i need to set to switch av to hdmi again, any1 here same problem with me??? |
|
|
Jan 21 2010, 10:35 AM
Return to original view | Post
#6
|
|
Junior Member
76 posts Joined: Apr 2008
|
QUOTE(ReneeRay @ Jan 21 2010, 10:24 AM) that day i saw someone posting reffering Astro Remote cant control the volume on decoder... but cant find it... press the volume up + ok button until the led blink 2 times. Then, you will be able to control the tv vol.I;m facing this problem now.... I;m using Plasma X10k ... how to setting to enable volume on astro remote... now need to use tv remote to control the volume.... Regards, Thank you But before this, please make sure you have configured the astro remote to be able to on / off your plasma tv. Refer to the manual on how to configure to use the astro remote to control tv. |
|
Topic ClosedOptions
|
| Change to: |  0.0381sec
 0.51
 7 queries
 GZIP Disabled
Time is now: 29th November 2025 - 12:12 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.