My Astro B.yond just installed 1 hour ago. I am in Kuching, Sarawak. Feel not bad and improve a lot.

But when I set setting in Home>Settings>Installation Settings>HD Settings when I choose 720p or 1080i, the screen become very big and some manu become unreadable, why? Only default 576p is ok.

I am using Panasonic FullHD Plasma P42S10K.

Should I restart Astro B.yond decoder?

This post has been edited by low98944: Jan 1 2010, 03:59 PM

1.apexg2
2.kelvin (Penang)
3.torreto (Subang Jaya/Kelantan)
4. rayfoo
5.l_berd (Penang)
6.RAMChYLD (Klang)
7 Cyberian (Sepang)
8. azri (U5, Shah Alam)
9. teikwing (Taiping, Perak)
10. AjKR06 (Bgn Serai, Perak)
11. horray (Petaling Jaya, Selangor)
12. LCP (Penang)
13. pknride (pekan,pahang)
14. dsubra (Klang)
15. tHeRiDdLeR (Serdang, Selangor)
16. economist (PJ,Sgor)
17. honamd77(Kuantan,Pahang)
18. zwanvedder(meru, setia alam)
19. ape (Shah Alam)
20. Iman210 (Pinggiran USJ, Subang Jaya)
21. kuekss (Sunway SPK Damansara,KL)
22. crossmaniac (saujana utama sg buloh)
23. ssyam ( dungun, Terengganu )
24. edthrax (ttdi, KL)
25. twL (Klang)
26. maja_5365(Nilai)
27. pirateguy
28. stimix
29. tailesley (Bukit Jalil)
30. suffeylp (Shah Alam)
31. sun_flower5 (Cheras,Selangor)
32. wcloh111 (Bkt. Mertajam, Penang)
33. seed80 (Seremban)[/spoiler]
34. allenultra (Gunung Rapat, Ipoh, Perak)
35. yanhui95 (Petaling Jaya, Selangor)
36.ScienceFreak (Gombak)
37. low98944 (Kuching, Sarawak)

---

Added on January 1, 2010, 4:26 pmDon't work. Because my default setting for TV is 16:9.

This post has been edited by low98944: Jan 1 2010, 04:26 PM

I have settled the problem after complete switch off Astro B.yond decoder and switch on again. Then, I set the settings again and this time everything fine and the screen will not become too big.

Maybe just now is due to the installer just install the decoder and Astro had not activate the service.

This post has been edited by low98944: Jan 1 2010, 04:37 PM

Thanks Bro. I already solved the problem by restart the Astro B.yond decoder.

I think you can start to write complain letter to Astro to complain the Installer cause if you got decoder their there must be a dish accompany with it. The dish is slight difference from previous one.

There is impossible out of stock.

This post has been edited by low98944: Jan 2 2010, 08:46 PM

Talking of dish, I also didn't notice my dish is any different from previous one but I over heard from Installer that he said the head slight different from previous dish.

On one condition, you MUST subscribe Astro B.yond for 12 months starting from April 2010.

Just would like to confirm, is the new 65cm dish also got the grey colour as the old dish? or all new 65cm dish is brown colour?

Last time I asked Astro CS their said got 65cm with old grey colour? The signal also 225 at #1 and 255 at #18...

Just change the ODU from 60 to 65. Strange signal drop from 225 @ #1 for ODU60 to 217 @ #1 for ODU65. Whereas at #18, ODU60 is 255 whereas ODU65 is 241 to 247.

If you don't pay stamp, will it render T&C void? Since government will not legally recognised as enforceable agreement, right? Then, astro will soon come to your home to collect back Astro B.yond lo.

Signal dead or alive?


This post has been edited by low98944: Jan 20 2010, 01:34 PM

Last two post lo. Change thread.

This post has been edited by low98944: Jan 26 2010, 12:32 AM