need help..just unlock 4th core of my PII X3 720..try to check my cpu temp but HW monitor show nothing..is it okay to unlock 4th core using stock heatsink?

owh..ok..my cpu probe reading show that my cpu temp is 43 on idle..is it ok to use stock heatsink since im not ocing?

yup..new amd user here..just use amd only for 1 week..huhu..try to learn sumthn here..

play cod mw2..temp rise till 55..still ok ryte?

usually how long does prime95 take to finish test?..newb here and this is my first time doing oc..kinda boring to wait..haha..

after 20 minutes, every test is pass and max temp is 64 on stock hsf and stock vc..is it ok?

actually, im not really intrested wif ocing..but after a few read n i was thinking..even a newb like me can do that..so why not give a try..1st, i try to unlock 4th core on my 720be..succesfull!!..hoho..vr heppy..then try to oc a bit..look like stable and try torture test wif prime95...after 20 minutes,boooring..haha..really dont like to wait..change back to normal speed and continue play DiRt2..huhu..

haha..i think i will do oc again when my final exam start..so i can leave prime95 do it test while i study..if its not bcoz of exam,sure its hard for me to stop play games..huhu..

need help..just buy cm 212+ and i need to chck my cpu temp but dono how..i cant chck with hw monitor coz i unlock another core so it show 0..how eh?

hye..learning a bit bout oc..doing newb oc by increasing multiplier and vc..i can only get 3.4ghz@1.39 vc and prime for 2h stable...try to reach 3.8ghz,can boot but not stable..prime for a few sec then sudden reboot..try to pump more vc to 1.5 but still unable to prime..can abang2 n kakak2 here xplain me why n teach me how to get 3.8ghz stable..




This post has been edited by hahanep: Feb 19 2010, 08:04 PM

i dono which 1 is the right 1..before i unlock 4th core,tmpin0 is about 10c higher than core temp...example core is 30c and TMPIN0 will be 40c sumthing...

when priming, tmpin0 is more sensitive..so heat will be the problem eh?..even its not reach 60c?..

aduh..so 56c max temp when prime is not good??....br je bli 212+..igt bley oc kaw2..huhu..btw, ah khoo org dungun ka?

@ah khoo
dlu blaja dungun..awok dungun mane?

56c is cpu temp..when ocing, should i read cpu temp or core temp?b4 unlock X4, my core temp only 45c sumthing when prime at 3.4ghz@1.27Vcore..