that's 555 eh? kata sulah pencen..

what about the temp readings?

should F8, TAB n enter..

This post has been edited by 8tvt: Feb 1 2010, 12:08 PM

belanje saya la abg cloudwan.. i send u noctua.. muahaha..

cpu ddr-phy voltage <-- what's the function?

if the IMC in cpu-nb.. what else reside in NB ar?
coz i saw some bios got SB n also pcie n also I/O voltage..

this is SPAM

let me test kaw² first ar.. kaboom then let go..

nb freq 2600 vs 2800 got significant different?

what i knew it's max out @ 2600.. beyond that not sure whether it's capable or not..
want to see whether the c3 can give benefit surpass 2600..

guess need to try it my self then..
thought u guys got the rig to try it out..
it's more or less when ur comparing 1600 n 2000 ram.. will not gain extra benefit like playing <1600..

some kind of wall limiting factor which hard to explain btw.. only through benchmarking numbers yes..

so it's kinda lucky spot to get a better timing i guess..if only manage to explore it.. though u all should knew well..

later they put divider then pening..

not a typo..
we always playing 800-1600 with certain timing..
some tight ram timing can beat the high bandwidth with loose timing..
(in the scope of safe voltage) for just increasing the nb freq..

read here n there, observing not technically.. it's same like cpu where got certain stage cannot be pushed anymore.. (ofcourse it can be push but my view is for normal daily usage which is not to strain more on the hardware by increasing the extra voltage etc for just tiny speed increment..)

beyond that maybe cannot see any significant different on amd system..
and some reaching the wall.. so need to push by extra voltage.. that's why now mobo bios' flooded with extra voltages..

isolation for which part where can be tweaked.. too squeeze them to the max.. where we always leave them in auto..

we not only oc the ram n proc.. but also the bus, timing n also clockgen..
no wonder no one answer my Q.. don't ask me, i also donno.. lol..
haha AMD still remain mystery..

so for note, try harder to stabilize the
nb-freq > ram > htt in the help of cpu speed..
some may have limitation like u mentioned..
it's time for not only for a best gadget that we have..
but for the right hardware combination should optimize the setup..

*lol now i knew why AMD no high speed proc.. - waiting 6cores..

really need a lucky star to get that proc ler..

This post has been edited by 8tvt: Feb 3 2010, 09:49 PM

so can la.. which one is better?

push more la bro.. 1.45v like that.. 4ghz²

ok la 55c not reaching 60..
but why psu rails screwed up?

how u oc so far?
mind sharing what u set?

ow.. it's reading the proc ID?

4ghz need 1.5v eh ah_khoo?

sure eh becoz of temp? not becoz of other things..
sometimes i saw can surpass 60c..