this is not intel...cant set 1:1 fsb.. u can actually... HTT at default and ur ram at 400mhz...super slow ram...
so no need 1:1..
i guess just keep the temp <60 when stress... or <1.4vcore ..which one comes 1st..for daily.. (anyone? )

me also waiting to get my ram kit... not to compete..but just want to compare the score...also might want to learn to the ram tweaking..
perhaps after try, then sell off the ram..no money left this semester...

as easy as copy pasta..

@dura
not try to OC slowly back? start back from scratch..not jump straight to the max oc setting

regor is real cool bro...
i can get <30 load @1.45vcore...inside an aircond-ed room..but i cant stand the cold of the room la.. only for the sake of PC,then i stood at it
urs ape lagi//WC

isit ok to sell of 550BE 0922 now? im afraid later no value remains for this chip.... more and more unlocking from amd now..

havent sleep yet xiukeong?

@-tze-
seems like u have a big sum of money..
crosshairIII?

yeah..hard to find it 2nd hand... no one want to let go this kind of mobo..just ask verdict/antonio bout this

it will be limited by the HTT...
ah_khoo done 330HTT...so it will be limit around that...

not as hardcore..
have 2 meanings
1 : lower
2:higher (both not same=not as hardcore as u wan)

so i presume that urs is more hardcore hardcore wan la..

havent see at msia market yet..
3.5ghz? most ppl able to do 3.6 with stock vcore...
try harder dood..

as a master said this before...

isolate...
alah..BE no need isolate2... just use multi...use multi only..see if can make it more than that...

SS will be helpful this time... post some

what batch or ur proc again?

use multi 1st...and see the proc can go how far...i doubt it only stuck at 3.55..
go to verdict's thread..

buckroger using same batch as u.. x4 3.8ghz on 1.47vcore...

finally..my modules arrive (Self picked actually..cant hold anymore)

cant straight away boot with 1600mhz cl7... sigh...nvm.. tweaking

this is wat i call "high expectation"
ekekkeke

memtesting nao...

sanggup cabut cpu cooler to change CPU...change bek to my old gem... 550BE

@ah_khoo..pay me rm20 then ill reveal the mobo..kekekek

This post has been edited by kuntawakaw: Jan 25 2010, 10:18 AM

came from same person...tweaked by different people... how it will be the same loh...
ofkos my result not as good as ur's

how far now? i thinking of burn in..but, i cant even wait the memtest more then 200%
i dump burn in 1st..later burn..

but me sucks at ram tweaking...will giv best shot..ur's last time how far can go eh sis?

last time u told me 2.1vdimm...kekekek..so tell fuzore the same la..
(but selamat i dont try 2.1v...1.9vdimm ok...2.0vdimm pown penah..on some suicidal run..not stressing any...sayang~~~

what divider u use bro? are them comfy with 1333 divider?

shiiiii~~
when will i able to submit any superpi result...
ocing the ram is harder then i tot it shud be

1600 8-8-8 stable...
but 8-7-8 not stable anymore... (using 1.7vdimm 1st..later increase)

currently 1400mhz cl7.. will pull up...trying hard nao..

malu..later final i post..

now is nowhere near ur's...
posting here coz getting bored waiting for memtest to do it's job

@antonio & ah khoo
thanks...ya.. i trying with slight vdimm changes..1.7 is nowhere to go..now at 1.8vdimm

vIMC been increased to 1.4 but the freq is only 2.26 now..so i gave extra2 vIMC there...

btw memtesting..SS..later..malu lg..low result..

@antonio
NB volt need to increase 0.05? (or is that stock? )

i seldom touch the vht.. only vnb increase abit if the heat is acceptable...seldom make it 24/7...
yes..window based memtest... wait untill 100% then prime large for few mins...


memtest + prime at the screen (+ lyn + YM outside of the SS)
(btw this is not the current..trying with higher clock now...)

@antonio
cl7 1333 done..
cl7 max with 1.76vdimm (At bios) is 1520mhz (at 1333 divider)

later try..
now have work to do...

1st run...(once the ram is plugged in)
7-7-7-auto-auto 1600mhz
vdimm 1.74 is a no go... refused to post...
later realize the trfc @ 90ns... cr @ 2t
so change to 110ns and 1t..
still no go...then straight away use 1333 divider till now...mebbe the ram not enough time to establish but i already force to do the job...

no B50..just 550BE...
owh..ya..havent try acc without unlocking..cuz last time biostar no EC firmware...
vIMC @ 1.25v..no go..
both slot set tried.. same..
nvm la sire... this is all the obstacle i have to get myself... i wont compete the superpi 32m (my score sucks... even with dual channel)
so at least i have things to play when getting bored doing thesis writing ..

trcf is auto at 90ns..okeh..later try with tighter trfc..



enough for today.this setting is fair enough for today... not much effort needed by my current setting..simple set and boot..steady and stable..

more than this..later... need to do some typing

This post has been edited by kuntawakaw: Jan 25 2010, 05:06 PM