p95 > orthos, he's runnin p95 anyway...

most likely can, mebe need to tweak imc part abit.

d chip seems fine w/ small fft test (512k & below). consider he ran default small fft/blend test, he's gettin there ledi, but in order for a default test (w/ default setting) to finish one round, it'll take atleast 3 hours to complete. that's why i prefer to change min = 1, blend test can finish within an hour. faster error detection & save lotsa time...

This post has been edited by ah_khoo: Jan 26 2010, 05:58 PM

Yeahhh! agree with unker, same method using for primming!

This post has been edited by verdict: Jan 26 2010, 09:10 PM

my even more stable oc than b4
i udated the bios ard
and i oc processor only
i set the vcore to auto
[attachmentid=1419856]
it is AMD Phenom IIx3 710
i unlocked the 4th core ard
i can't get the higher bus speed ard
"myb"~ need better cooler

This post has been edited by yong_lin94: Jan 26 2010, 09:41 PM

What cooler u using rite now?Please dont set the vCore Auto.With that 3.2Ghz i THINK it could stable with only 1.35V or even lower than 1.3V...

@amdathlon
u using what "automatic 1-click" tweak on ur win7?
i tried all manual set tweak (At least all that i know) and still...my result is 18m 36s and not satisfying me...

okay this is my 1st test on my ram @ 1600MHz 8-8-8-24 vdimm 1.72v ... pass 1 test of memtest86

Awesome! after this can post result one! Yeahh! bang gaban!

jgn kasi sy malu laaaa

taruk 7-7-7-20 then only memtest...

when at memtest main page, press "1" "3" then "8" key then press "Enter"

Let around 5 loops of passes

sir, may i know why test 8? i usually run test 5 which i learnt since d gud old day of k7... or i read wrongly since then...

sy pown post cl8 punya ram...
cant get cl7 stable with nice vdimm

whoooaa like that arrr never knew that ok later will try it when have time to play...

but sometimes.. memtest is ok..
stress in windows got prob.. haih..

imo, memtest stresses ram only, exclude cpu + imc. i could be wrong thou.

but passin memtest (dos) is basic stability test for ram, if u can't pass d test, expect more instability when u load into windows where everything involved.

even others are in stock..
so the worst i can guess is the ram divider.. depends on mobo..

ram is the first part i need to tame.. to ease other tweaking...
that's why i don't like to change ram often.. need alot of time to oc and fine tune it..
until now also always forgot the jargon

This post has been edited by 8tvt: Jan 27 2010, 09:41 AM

it's easier if d imc is not built in like last time, but now, amd & i7 (i5 mebe not so sure since i'm an intel noob) have it built in along w/ d chip, so ram tweakin is not as simple as before. ram (value) is d cheapest part to play w/, unlike chip or d wallet burner gfx...

Yesss, sy mrajuk wif u.. Xmo kawan lagi..
It's ok la bro, i know u need the moolah fast and u can't wait for a slowpoke like me
As a pembalasan next time if i want those crucial value kit ur gonna have to get it for me from SLS

Downgrade mobo again leh??? If u want AM2+ mobo i got already

why didn't u grab the d9 from bro antonio selling it's still a value ram but with good chip of coz ..

bapak budak pretend to be noob

jual kat cloudwan ke? huhuhuh
baru pk nk jual gak..duet nk makan dah xde

ok, bout imc,
i read in some thread said that IMC voltage=vtt voltage,
but mine after adjust Vdimm( = ddr3 volt rite? ) the vtt cant b adjust anymore coz being disable by bios...
can someone explain function of imc?
as far as i know, cpu-nb is imc rite?
if its true, in my bios has both vtt and cpu-nb volt control

mana lak aku nak jual ...

yes.. yes.. i would like to know that also ...