Al steel 4-2-1 header = RM2xx - RM5xx(vary)
Stainless steel 4-2-1 header = RM4xx - RM6xx(vary)
Al steel 4-1 long primaries header = RM3xx - RM4xx(vary)
Al steel 4-1 short primaries header = RM2xx - RM4xx (vary)
Stainless steel midbox = RM2xx
Stainless steel 12inch bullet = RM2xx
Stainless steel 9inch bullet = RM1xx
Stainless steel s-flow muffler = RM4xx
Stainless steel straight flow muffler with silencer = RM3xx
Stainless steel straight flow muffler = RM2xx
__________________________________________________________

for more detail :
email me at mfa_145@yahoo.com
__________________________________________________________

READ CAREFULLY AND THOROUGHLY

1. dealing method : deposit 3-4 days before installation date to secure order
2. installation for exhaust system will take place in my panel workshop in kepong
3. postage can be arranged with extra charges
4. all prices i quoted inclusive of installation
5. i don't have shop, so don't ask whether can drop by, have a look etc2

Some sample of headers :

Stainless steel 4G92 4-2-1





Stainless steel 4G18 4-2-1





This post has been edited by mfa_145: Mar 30 2012, 11:16 PM

4.1 myvi good for manual ?

SEVERALS COMMENTS FROM PREVIOUS CUSTOMERS

From Shahid SNC (satrianeoclub),

ZENDEN 4-2-1, midbox, bullet, dan REDLINE drop in air filter.
testimonial :
Rembau(n9)-Bukit Lanjan(Damansara) perjalanan lbh kurang 100km and i got 6.8L/100km




From Amir SNC,

My Testimonial
Route: From Puncak Alam - Subang - Batu Caves - Puncak Alam
Items: ZENDEN Header 4-2-1, midbox, ZENDEN bullet, and REDLINE drop in air filter
Estimated Kilometers: 120km
FC: average 5.7-6.0L/100km



tak menyesal & tak rugi. Sebelum ni nak dapat fc sampai 6.0L pun susah, pickup pun alahai (skang nak climb pun ringan ;D)...
sekarang dengan product ini kereta saya mampu memuaskan hati sy...harganya pun berpatutan...hehehe ..anda bila lagi? ;D ;D

p/s: bro mfa_145 betul ke ni? mcm tak pcaya..

From dzerg9903 BLMClub,

Just finish installing extractor, bullet and muffler during the day today at Wai Heng Kepong for my blm. Had to say, for the money i paid, im quite impressed. The sound is nice, not to loud, low-humming-bass sound. The pickup is good also. Free BUMP!

From Mizta SNC,

tq bro aku da dyno dpt ...hp hehehehe. ;D ;D ;D ;D

[quote=lanuncyber,Sep 20 2010, 11:49 PM]
thank god i met with mfa_145!

with limited budget, i planned to replace my stock exhaust system with a better one. i don't expect magic to happen to my car with a mere small amount of money, but mfa_145's setup did improvise my ride acceleration and fuel consumption!

Ride: Satria Neo CPS
Modification: 4-2-1 extractor + bullet
Fuel consumption: Before = 6.8L/100km and now remains competitive around 6.6L ~ 6.7L/100km.
Acceleration: No numerical datas, but i can feel that the engine breathes better, the pick-up pull is stronger, which translate to higher torque produced.

mr mfa_145 did give me a lot of advices, besides sharing his knowledge and experience. now i'm looking to change my straight flow muffler to an s-flow, which is believed to be a better match to a 4-2-1 extractor, giving more torque at low-to-mid rpm.

and i'm kinda feel that my 1.6 block can compete better to my dad's 1.8 civic, compared to before. don't expect magical things by installing exhaust system, but do expect that good things not necessarily come with high price. ask mr mfa_145 to do the setup, let he does the job, and u enjoy it urself. thanks bro mfa_145! =)

This post has been edited by mfa_145: Sep 21 2010, 01:24 AM

if 50-50 ? i dont rev much but prefer for sound.which 1 suits ? but forum head information is based on 4-1 for manual ? am i right ?

No cod ? Then you going to ship the item all the way to other states ?

SEVERAL PICTURES TAKEN FROM CUSTOMERS' CARS





















This post has been edited by mfa_145: May 20 2010, 08:52 PM

pm me the drop in air filter for viva~~
is it can clean it ?

CUSTOMER'S CAR (SATRIA NEO)









This post has been edited by mfa_145: May 20 2010, 08:55 PM

bro, the lcp's price does it include all 3 or price for 1?

2ndly, wut is the acg degree? can recommend good tuner for tune n installation?

pm the bes price if i take both items...thx alot bro

Today latest pictures. Gen2 CPS.












This post has been edited by mfa_145: May 24 2010, 07:00 PM

thx 4 da fst response bro..im jes enquiring first, will contact u once in budget! free bump for fast seller!
btw, im using a satria neo..

got viva ?

Today's gallery (07/08/10)
Satria Neo CPS


















This post has been edited by mfa_145: Aug 7 2010, 04:42 PM

Today's gallery (27th August 2010)

Satria Neo CAMPRO














This post has been edited by mfa_145: Aug 27 2010, 03:36 PM

Do you have 4-2-1 extractor for Altis '01? PM me best price. Thanks

Bro,
Can pm the details for BLM + installation + installation location.

Thanks

This post has been edited by dzerg: Jan 10 2010, 10:24 AM

Another one (27th August 2010)

Satria Neo CPS














This post has been edited by mfa_145: Aug 27 2010, 03:37 PM

Today's gallery
Myvi 1.3 Auto

















This post has been edited by mfa_145: Sep 30 2010, 08:31 PM

Browse this thread for more pictures and comments from customers

This post has been edited by mfa_145: Sep 30 2010, 08:34 PM

B
U
M
P