QUOTE(AstInst @ Dec 21 2009, 04:05 PM)
I think I get what you mean, if Astro was to increase SD MPEG 2 to 9Mbits/s then we would only have 3 channels per transponder, a total of 30 channels... so which 70 channels would you propose to remove in order to do this?
The SD channels on Astro B.yond are the same Measat 3 transmissions that was received by your old SD decoder, they are not specific transmissions to Astro B.yond.
My Astro B.yond gives perfect 5.1 audio, no echo just true 5.1. You should check your audio settings, you could have some post processing that is causing the effect. Some cinema audio systems have mode that turns stereo in to an artificial surround sound, you could have this switched on. As with the TV you should turn off all enhancement modes on your amplifier.
I would also check that you have not got crossed wires, i.e. red on the amplifier connected to red on the speaker, if red is connected to black then you could get all kinds of phasing issues. Also, make sure you are using the digital audio connections, not stereo analogue.
Im using Yammy 863 connected to my Sony Bluray, Dvico HDM7000A, PS3 and x360 with HDMI cable. All my souce tested in Dobly True HD, DTSHDMA, DTS and AC3 without any other problem including Echo Sound. But watching HBO HD the Echo starts. This is my setting.
Home>Setting>Your Setting>Digital Audio Setting>Dolby Digital 5.1 (Digital Only)
When i set to Stereo (Analague and Digital) then ok
but not in True 5.1.
This post has been edited by hasratusaha: Dec 21 2009, 04:28 PM