Outline ·
[ Standard ] ·
Linear+
QX6800 Temperature
|
TSsharkeer
|
 Dec 5 2009, 09:16 AM, updated 17y ago
|
|
Wat is the safe temp for this processor? Here is temp for my proc at 3.8GHz 1.344vcore full load.
Hardware monitor
-----------------------------------------------------
Intel Core 2 Extreme QX6800 hardware monitor
Temperature sensor 0 71°C (159°F) [0x1D] (Core #0)
Temperature sensor 1 71°C (159°F) [0x1D] (Core #1)
Temperature sensor 3 65°C (148°F) [0x23] (Core #3)
Temperature sensor 2 66°C (150°F) [0x22] (Core #2)
Is it ok?
Advice needed. tq
This post has been edited by sharkeer: Dec 5 2009, 09:25 AM
|
|
|
|
|
|
TSsharkeer
|
Dec 5 2009, 12:57 PM
|
|
|
QUOTE(subrok007 @ Dec 5 2009, 11:20 AM) may i know your voltage set in BIOS? 1.344v is reading frm windows? 1.3875 in bios. 1.344 in cpu_z |
|
|
|
|
|
TSsharkeer
|
Dec 10 2009, 09:16 PM
|
|
|
QUOTE(uzer85 @ Dec 7 2009, 08:47 AM) ts, is that onload temp or idle?? even with megashadow, on load should surpass 70C barrier easily. unless on WC setup or in aircond room~  thats 100% load temp (early 10mins). the highest i see after 6 hours is 75c  .
Added on December 10, 2009, 9:17 pmQUOTE(subrok007 @ Dec 7 2009, 03:25 PM) wat mobo r u using? if air cooler... this temp looks normal... if WC... then need to reassemble dy.. The spec is exactly the same as sig. This post has been edited by sharkeer: Dec 10 2009, 09:18 PM |
|
|
|
|
|
TSsharkeer
|
Dec 11 2009, 01:42 AM
|
|
|
QUOTE(lex @ Dec 10 2009, 09:34 PM) 100% load and 75C at 3.8GHz overclocked should be OK... Even a Core 2 Duo overclocked would reach those temperatures on full load. Are you using Prime95, Orthos, etc?  yeah, my e8500 oso reach 75c full load at 1.3v. but the prob is core 2 duo thermal spec is 74.1c. this 1 is 64.5c. so a bit worried. i'm using prime for stability test. |
|
|
|
|
Quote
0.0119sec
0.55
6 queries
GZIP Disabled