Yeah the torque is what matters for mine, try to maintain as much as possible. My next mod will be the ECU

kcng's Campro is crazy....guess DOHC does matter ~_~

Hi,

What colour is the waja you have shown here? It seems that Proton copied the colour from the exora and persona which is blue haze....
Anyway my SA just told me that the 2010 model is m line and the premium or high line is no more in production.   Can anybody confirm this.

If that is correct than better be fast and book the remaining 2009 models, 5k discount... New 2010 discount 2k but m line...

just return from eon today to take my cps.. ..so far so good.dont have time to test more bcoz raining day.so tonight i want to read the manual book..too many things i dont know..haha.

Guys, how much is a stock 1.6 clutch plus clutch cover?
Wat brand is it?

Nice figures....running lean

Guess DOHC does matters, bolt on mods Campro can take advantage a lot

My 4G92P, do alot also 115 HP on wheels nia ~_~

dun dream..just buy......

Around RM500+ depend what you wan. Unless you get cheap set.
Seem many cps owner here got done a dyno. Why don't we organizer a convoy to do dyno for the one who haven't do? It good to see the improvement before and after the mod.   

i juz bought a set of used GAB springs... its lowered more than i expected. first time using lowered springs.

mine stock is 4.5 fingers front, 4 fingers rear. after installed... its 2.5 fingers both front n rear... cornering... liked it! damage : RM150 + rm80 installed... hehe...

using stock abs.. will change if found leaking.. i can now safely use the 15" 55 series tyres without looking weird with big big voids... hehe...

initial testing with hard braking at corners resulting some rubbing at the front tyres. not sure whether its the fenders or foam insulation i put near to the wheel arches... checked tyres but no scrubbing seen....

then tried full load with 3 adults at the back... seems still ok at going through humps. moderate humps not those super high ones... maybe becoz i'm using normal abs not lowered abs...

it still didn't solve my "kruk kruk kruk" sound at corners.... >_<"

sphiroth u bought 205/15/50 tyre right? what brand and how much each?

The seller could be holding old stock.

Let me ask my friend see he willing to sponsor half for our lyn cps user or not. Hehe.

Why ur torque jumping like that? Sure feel the push... Mine just 40 degree straight up...

Yesterday checking AF ratio with aznan... Nice AF device he has... But still running 14 ++:1... Try to tuning, but regulator seem not responding.. Huhu...

humm... dunno lah, 3.8bar still 14.++:1 ..... up 4bar, fuel reg start to make loud noise....  dun dare to up more, the noise is quite loud.... something is not right...

my car, 3.4bar = 13.5:1afr .....  3.8bar = 12.5:1afr ....

I thought you said you broke for a few months   what is low cost  throttle controller?

very interesting... when can expected for trial...   

cheaper than pivot 3-drive??

sorry wrong typo...i know u're using 16 inch....the price for 205/16/50 

Sphiroth, i want to see your rim n tyre can?

nice Konig Feather wit yoko rubber

[attachmentid=1407183]
this rim KONIG - Feather model 

guys, long time no see!!! XD been missing for.. a yr + i guess.. hahaha how's all the poisoning spreading ard??

BTW, recently i bought over a used unit of apexi RSM in a damn reasonable price.. but still wondering, should i install it? will it cause problem to the ECU?? of cos i think will void the warranty.. BUT my car almost 2 yrs d.. as wat i know the warranty for tear & wear is only 2 yrs rite? yet for engine & gear box is 5 yrs provided every service is done in proton SC..

Sphiroth & other sifu kindly advise!! ^^

but i scare will cause prob to the ECU    wat abt the warranty thinggy.. any idea?? cos so far didnt saw any waja installed that b4..