open command prompt
type "ipconfig /all"
post the result here
TP-Link TD-W8901G, Couldn't connect via wireless
TP-Link TD-W8901G, Couldn't connect via wireless
|
Nov 12 2009, 11:03 AM
Return to original view | Post
#1
|
Senior Member
2,860 posts Joined: Nov 2004 |
open command prompt
type "ipconfig /all" post the result here |
|
|
|
Nov 14 2009, 09:38 PM
Return to original view | Post
#2
|
Senior Member
2,860 posts Joined: Nov 2004 |
are you using windows dial up to log in to the streamyx??
if yes then delete the windows dial up and set the streamyx account info in the router. |
|
Nov 15 2009, 09:41 AM
Return to original view | Post
#3
|
Senior Member
2,860 posts Joined: Nov 2004 |
log in router
interface setup >> internet VPI = 0 VCI = 35 ISP = PPP0A/PPPoE username = yourstreamyxusername@streamyx password = yourstreamyxpassword encapsulation = PPPoE LLC bridge interface = deactivated connection = always on get ip address = dynamic click save after save setting restart the router...... This post has been edited by tvcat: Nov 15 2009, 09:44 AM |
|
Nov 15 2009, 07:51 PM
Return to original view | Post
#4
|
Senior Member
2,860 posts Joined: Nov 2004 |
the setting is ok.....
try reset the router and reconfig.... |
|
Nov 15 2009, 09:14 PM
Return to original view | Post
#5
|
Senior Member
2,860 posts Joined: Nov 2004 |
try select the other pvc for the "virtual circuit" like pvc1
is the value of the vpi and vci change when you select a different value for "virtual circuit"? if yes then try to change the "virtual circuit" value until the vpi = 0 and vci = 35 then try to save. This post has been edited by tvcat: Nov 15 2009, 09:17 PM |
Change to: | 0.0168sec
0.39
7 queries
GZIP Disabled
Time is now: 29th March 2024 - 09:21 AM |