QUOTE(hahn87 @ May 1 2010, 04:29 AM)
move your excalibur to exhaust back.
stock fan pull back to side..
bottom intake sufficient enuf to supply air for gc
that area hot because of the stock cooler nature. the hot air going up and down from the heatsink.
top exhaust 2x 120 fan not ideal unless u cut the plastic honeycomb on the top bazel if not air flow will be restricted and stray back down from the excess holes that are not covered by the fan.
if don't wan to cut the plastic honey comb. opt for 2x 140cm fan instead.
final solution. time to change CPU cooler =)
'top exhaust 2x 120 fan not ideal unless u cut the plastic honeycomb on the top bazel if not air flow will be restricted and stray back down from the excess holes that are not covered by the fan. ' stock fan pull back to side..
bottom intake sufficient enuf to supply air for gc
that area hot because of the stock cooler nature. the hot air going up and down from the heatsink.
top exhaust 2x 120 fan not ideal unless u cut the plastic honeycomb on the top bazel if not air flow will be restricted and stray back down from the excess holes that are not covered by the fan.
if don't wan to cut the plastic honey comb. opt for 2x 140cm fan instead.
final solution. time to change CPU cooler =)
May 1 2010, 04:48 AM

Quote
0.0368sec
0.22
7 queries
GZIP Disabled