1.  Setup your WiFi setting.
2.  Verify the WiFi functionality (browse some web page).
3.  Set the WiFi as 1st priority inside the destination (internet) setting.
4.  Set the WiFi as the default access point (for the internet).
5.  Delete the WAP / MMS / STREAMING settings and left the 3G Internet (as 2nd priority inside the internet setting).
6.  Edit the 3G internet setting and change the "password prompt" to YES.
7.  Load up the maps loader.
8.  Click on the delete maps from storage.
9.  Reload in the maps (at least the malaysia map must be selected).
10. Load as well the voice guidance file.
11. Wait for all the downloading and uploading finished.
12. Run Location and disable the agps and network under positioning setting.
13. Run the OVI maps.
14. When the 3G internet prompt up select cancel (do not connect) (if it still pop up, suppose wont because we already disable A-GPS and network in Location setting).
15. Go to setting and change the internet to online.
16. Select appropiate voice guidance file.
17. Go outside where more satelite can be search.
18. Now go to my location and wait for the satelite to get a fix (might be take long since no agps)
19. Make sure the red dot are "IN MALAYSIA".
20. Change maps mode as SATELITE view to try the WiFi can download the satelite image (to ensure WiFi is working).
21. Once confirm WiFi working switch back to maps view.
22. Walk around and you will see the GPS is working already (since it already lock, red dot will turn SOLID RED and satellite bar should be green).

The most useful for the 3G internet password prompt when agps and network positioning enable:
1. Select YES during the password prompt you will have A-GPS (fast lock with charges).
2. Select CANCEL during the password prompt you will have full I-GPS (slow lock but FOC).

Steps 18 and 19 are needed because sometime during the first time OVI maps run it will set it "previous' location as some where maybe not within Malaysia and if this happen and you dont have those location maps downloaded in the database then it will direct download from the internet and who know which access point it gonna use (if it use 3G internet then you will lost lots of phone credits for those huge maps data), confirm this if you dont have the maps data install it will direct download the file.

Below is a screenshot shows, full OFFLINE guide, see the GPS INTERNET connection is striked out:



Credits to sklchan

The WSOD occurs wen the firmware boot analysis fails to verify the intergrity of memory card. This could happen due to improper plug out the memory card from computer or a laptop without terminating the active connection "Safely Remove Hardware" or force fone shutdown with taking out battery few times, these can lead to corrupted memory card.

Its same like a desktop / laptop computer, the more u improper shutdown, the problem will rise on the next start.

Its advisable to make a full backup of memory card somewhere in computer, incase of crash, the user can just format the memory card and opy back the old data.

Having an issue with your Nokia 5800XM / Nokia N97 when it simply couldn't boot up with stuck at Nokia logo and the only way out was to do hard reset. No more hard reset again say no more to losing all my data and tried playing with battery, SIM, SD/SDHC, headphones and charger random insertion and removal.

All you need is:
- Nokia Nokia 5800XM / Nokia N97
- Charger

Follow these steps:
1. Turn OFF your phone.
2. Insert charger.
3. Remove charger right after screen lights up.
4. Wait a couple of seconds till screen turns off and just after that press power button.
5. After standard vibration notification just put your charger in.
6. You can insert your PIN again.
7. Done !.

Now as the standard procedure to overcome this problem read below my write ups. Fresh bought or even having data loss? Refer below tips !

Set you Windows Explorer -> File Options (Enable view all files & system files)

1. Format ure SD Card (manual DOS trick),
-  Goto Command Prompt and type C:\>Format <SDdriveletter> eg. Format E:

2. Or you can use Windows Explorer formatting, right click on the memory card drive letter and select format.

(Dont't ever use quick format!)

3. Wait until it finished.
4. Install ure desired apps and games and themes.
5. Defrag (not recommended) and ScanDisk ure SD Card every 1 week.

Memory card or flash memory card is solid-state electronic flash memory data storage device capable of storing digital contents. Most SD cards ship preformatted with the FAT or FAT 32 file system on top of an MBR partition scheme. The ubiquity of this file system allows the card to be accessed on virtually any host device with an SD reader. Also, standard FAT maintenance utilities (e.g. SCANDISK) can be used to repair or retrieve corrupted data. SD cards with 4 GB and smaller capacities can be used with many systems by being formatted with FAT16 (4 GB only possible by using 64 kByte clusters, and not widely supported) or FAT32 file system (common for file systems 4 GB and larger). On an SD card, this is unnecessary, as the time required to access any block is the same. Defragmenting an SD card will wear the card out slightly, as the number of writes are limited before failure occurs (usually 100 000 times).

Enjoy!