=.= just got my 1st WSOD..... wtf.... hard resetting now.... =.= i didnt back up.. all GONE! shit!

---

Added on January 19, 2010, 3:34 pmbtw.... since i hard reset already... i want to update to V2.0... but.... =.= v1.2 is lastest?? =.= malaysia Ori phn kenot update to V2.0?

This post has been edited by tplus1: Jan 19 2010, 03:34 PM

tplus1, what is your product code?

---

Added on January 19, 2010, 3:43 pmi think he only own 5800xm..

This post has been edited by PyOsE: Jan 19 2010, 03:43 PM

0407649

i lazy open phn see.... i see from my warranty card...

ohya, how can i know the phone i buy is 水机 or not original set?

check if your product code have v20 available HERE!!

if not available, either wait or ask NCC to do it or change product code...

---

Added on January 19, 2010, 5:07 pmIdentify Original and AP Set
- Take out the phone case and battery.
- original set comes with authorized company sticker (Zitron, Avaxx, T-Choice, Midland).
- AP set comes with AP company sticker (Final Choice).
- press *#06# to check the phone 15 digit serial number (IMEI).
- compare it with the IMEI written on phone sticker (back of phone case) and package box sticker.
- for original set, these serial numbers are the same.

Source: 5800XM Thread FP

This post has been edited by PyOsE: Jan 19 2010, 05:07 PM

ok...

soryy , my product code is 0586297....

lastest just Version: 12.0.026

but why other older product code can be update to V20????

yea he only have 5800XM.

---

Added on January 19, 2010, 10:00 pmeven MENU have.

My 5800XM menu dont have

This post has been edited by aspire2oo6: Jan 19 2010, 10:00 PM

dont know lei...Nokia have problem with your product code maybe..just send to NCC..they'll do it for ya..

is he a kid?

probably....

Confirmed the silver rim is covered under warranty but currently no stock..... have to wait for 2-3weeks.... sigh

Hi everyone.

I just got my n97 yesterday.

I have one question: How to input chinese when i want to sms ?

i open new sms, select options -> input options -> writing language -> 简体中文

I still cannot type PinYin.....even tho the top screen shows 70(1) <-- meaning 70 chinese character allowed...right ? but why i still cannot type ? it just display whatever i key from QWERTY but no chinese word display

Anyone has idea of this ?

sorry la bro... U are a little slow.. U go to NCC in 1U? as I said they told the stock are running low mah..
wait a while loh.. wat to do...

"No Gateway" message solution and IP/DNS setting

[Someone once asked how to set the IP and DNS address before so below is the solution]

For N97 go Destinations --> Access Points (that you use) ---> Options [Edit] ---> Options [Advanced Settings] ---> IPv4 settings or IPv6 if you are using that. You can even enter proxy server address here..

Below is taken from nokia forum----------------------------------------------

Listed below are solutions which have worked in the past for those getting a "No gateway" message when trying to connect to a wlan.

1. Check to see if MAC filtering is enabled on your router, if it is, you will need to add the MAC address of your phone to the "allowed" list. Use the code *#62209526# to get your phones MAC address.

2. On your pc/laptop, click on Start>Run and type ipconfig/all and note the settings for:

a) Subnet Mask
b) Default Gateway
c) DNS Servers

Now, on your Phone settings: Goto Menu>tools>settings>connection>access points. Select your WLAN access point and go to Advanced settings then IPv4 settings.

IP address: Start with the Default Gateway IP and change the last number to something else. Do not use the same IP as Gateway of any of your pc's.
For Subnet mask and Default gateway use the same as on PC
For DNS address: Change to user defined and enter same settings as on PC

3. Check for firmware updates for your router and install if there is one.

4. Try different channel settings on your router.

5. Disable WirelessLAN Power saving mode. To do this, goto Tools>Settings>Connection>Wireless LAN>Options>Advanced settings>Automatic configuration>change>Power saving, set this to disabled.

6. Disabling QoS (Quality of Service) has been known to resolve this issue on some routers.

where's Leo the Lion anyway?

im using just N5800 not N97, tplus1 i've guided on WSOD solution u never read .. aisehman, if u read tat out, sure u can copy ure data out b4 format

---

Added on January 20, 2010, 2:42 pmThe "No Gateway Reply" issue is just about logging non-OPEN WiFi signal. for OPEN type WiFi, you'll see a green coloured notification "Connection to Access-Point is possbible.." once the connectivity diagnostic end. This means the WiFi is OPEN without WEP/WPA/WPA2 encryptions.

To solve this non-OPEN WiFi signals, you need the WEP/WPA/WPA2 encryption key to logon successfully.

This post has been edited by Xploit Machine: Jan 20 2010, 02:42 PM

Oo.. i got solution about that... i cant taip chinese but got the 简体中文 also...

but after tried a while.... got steps to do d... (duno is it a bug or wht)

1st, change ur language to 简体中文, which u had done..

then, change ur input into numerical input... (the ordinary handphone input with number) then cahnge the input into PinYin...

then open ur keyboard, taaaaa daaa... now u can input chinese via ur QWERTY keyboard

P.S. i done that several times then it just automatically can straight sms with PinYin via keyboard...

Thank you Thank you!!!!!!!!

so this is the bug with n97....Hehe.....

must close the keyboard 1st......

Here is my steps:

1. close keyboard, go to messaging->new message
2. touch screen in the message content part....the touch-screen of keyboard version appears...
3. touch-screen change the 'abc' to 'pinyin'....
4. then open keyboard QWERTY
5. taaaaa daaa........


Thanks alot tplus1!!!

anyone able to chat with friends through instant facebook chat ? anyone knows the way? thx for sharing

u got the answer