Sep 8 2012, 07:37 PM
QUOTE(kelvyn @ Nov 16 2011, 08:50 AM)
The Realtek 1055 launched in late 2010 and is a non-network version with limited RAM (only 16MB flash and 128MB DDR).
How come the firmware update (install.img) is 30MB in size but the flash is only 16MB?You can see the flash ram size from the boot log.
QUOTE
REALTEK ROM Monitor, Revision 0000.0302.0011.
Copyright © Realtek Semiconductor Corp. - All Rights Reserved.
For a list of available commands, type 'help'.
Compilation time /version= Apr 20 2011 15:48:27 /0000.0302.0011
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x78
Endianness = Little
Flash memory size = 16 MByte
SDRAM size = 128 MByte
Copyright © Realtek Semiconductor Corp. - All Rights Reserved.
For a list of available commands, type 'help'.
Compilation time /version= Apr 20 2011 15:48:27 /0000.0302.0011
MAC address = 00.11.22.33.44.55
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0x93 / 0x78
Endianness = Little
Flash memory size = 16 MByte
SDRAM size = 128 MByte
Added on September 10, 2012, 11:29 pmNever mind. I figured out the actual files used in the firmware is in a sub-folder inside the Install.img file and it's less than 16MB.
This post has been edited by totally_skint: Sep 10 2012, 11:29 PM
Quote
0.0206sec
0.94
7 queries
GZIP Disabled