Yeah, I love the new desktop set, the keyboard has a touchpad

I'm using a set of old microlab speakers, planning to buy a new set of microlab speakers which looks like this:

Yeah, thanks

My current microlab which costed me RM89 served me nicely for 3 years+ but recently lotsa noise because I usually boom it at maximum volume. This M-200 is RM168 at All IT and I plan to buy a set as the satellites has got 12W each while the subwoofer is 16W, totalling up to 40W(thats really loud). I believe it can perform well too.

This post has been edited by Silverfire: Mar 13 2010, 02:29 PM

Too near la you need to have like at least 2 metres of distance.

New mousepad, new blings and new harddisks

Haha, yeah. But makes me broke everyday

New speakers and new blings for my rig

Ambient for airconditioned room is around 26'C while non-airconditioned room is around 28'C.

1.05v 3.267ghz 54'C max for non-airconditioned room and 50'C for airconditioned room. Overall very happy with it Stock heatsink would be 67'C for airconditioned room. For something which costed me RM70 new is very very good.

Previously before I install 2x 14cm exhaust on top of my CM690 the temperature of my rig overall were higher.
1.05v 3.267ghz 61'C max for non-airconditioned room and 56'C for airconditioned room. Very happy with the xigmatek fans


This post has been edited by Silverfire: Mar 26 2010, 01:24 AM

Buy Hyper212+ then sell the fan = RM70 for the cooler

I never bothered to see whether it vibrates or not but I guess it is tight enough.

Thanks

Nope, it doesn't shake the table. I'm not sure whether it is better place it on the floor or table

The blue and the one on the heatsink are both Xigmatek fans

This post has been edited by Silverfire: Mar 26 2010, 01:25 AM

The other 12cm I have in my rig: http://www.xigmatek.com/product/accessory-xlf-f1255.php
The 2 new 14cm I installed yesterday: http://www.xigmatek.com/product/accessory-xlf-f1454.php

Sadly the black blades aren't UV reactive

Uh... I don't use those drawers anymore so it is okay to block them

Nope, not customised, ready made and bought in some furniture shop

14cm Xiggy fans are RM34 while 12cm RM25
Uh... It is a set with 2 cupboards and a bed, I think around RM4k? I bought it like 3 years ago. I think I bought it near Connaught's Econsave.

This post has been edited by Silverfire: Mar 26 2010, 02:02 AM

And get some Nucleartec UV tubes from niclasteoh, they are better than Vizo's and Cooler Master's. Then you're ready for any blings And oh, some motherboard parts may be UV reactive.

It seems Xigmatek fans are really popular, both foreign and domestic their fans are quite and push quite an amount of air.

This post has been edited by Silverfire: Mar 26 2010, 02:14 AM

The dimm slots and my sata ports are UV reactive but my sata ports ain't that bright because my UV tubes are located higher. Normal cables like white/yellow/red are also UV reactive, PCI-E/PCI might be UV reactive too depending on the colour.


This post has been edited by Silverfire: Mar 26 2010, 09:53 AM

The front glow is sweet

Cool keyboard, but I guess if the user is not a <7 fingers typist then the keyboard will be a wee bit difficult to use?

This post has been edited by Silverfire: Mar 28 2010, 03:59 AM

It is not a touchpad, more like drawing pad where you draw with it. As far as I know, it requires a special pen provided for it to work and it even detects pressure so your drawing can be much more realistic.

Bought a new table lamp

Ah I see. My bad
I bought it for only RM30 but buying the bulb is another RM20

Nah... It is just a Galaxy GTX260+ Overclocked version with tri-fan cooling I wish I had HD5970