Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
9 Pages « < 5 6 7 8 9 >Bottom

Outline · [ Standard ] · Linear+

 AMD® Socket AM2&AM3 Overclocking V20, The times moves on..Can AMD Survive?...

views
     
xixo_12
post Nov 13 2009, 05:31 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
so many? where got? I think none.. maybe..

I think no need to look for the speed, look for the volt.. 1.4v and below is recommended with air colling wink.gif
xixo_12
post Nov 14 2009, 07:23 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(kuntawakaw @ Nov 14 2009, 07:00 AM)
OC awal pagi...
can consider this 3.8ghz? pls......
[attachmentid=1302850]
while i pursue 3.8...ah khoo alredy make a move to get 4.0ghz
*
ah_khoo playing X4, u play X3 doh.gif laugh.gif
xixo_12
post Nov 14 2009, 02:10 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
kunta, how do you unlock into x3? hmm.gif
xixo_12
post Nov 14 2009, 02:26 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
ok got the information wink.gif

This post has been edited by xixo_12: Nov 14 2009, 02:30 PM
xixo_12
post Nov 14 2009, 09:13 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(uzer85 @ Nov 14 2009, 08:26 PM)
jeles btol aku dgn thread amd. active giler~
*
silent shoot to all user outside.. think about usage, stop the waste laugh.gif
xixo_12
post Nov 14 2009, 10:44 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
nice thumbup.gif
xixo_12
post Nov 18 2009, 10:13 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
Detected wrongly brows.gif
IMO, it detect based on the CPU VID.. but not the increment setting
xixo_12
post Nov 18 2009, 01:40 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
there is gathering before this.

type in google.. ln2, and u will get the answer
xixo_12
post Nov 20 2009, 09:00 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
If you use Asus M4A785TD-V evo and can't change timing or volt, u can throw it into drain.. sleep.gif tongue.gif

http://www.brightsideofnews.com/news/2009/...apable-ram.aspx
xixo_12
post Nov 20 2009, 09:47 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
good thumbup.gif
try on application
xixo_12
post Nov 20 2009, 11:31 AM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
the power of internet will let u have a pair of ram on your hand wink.gif
xixo_12
post Nov 21 2009, 07:16 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
where u buy C3 box? hmm.gif
xixo_12
post Nov 21 2009, 08:06 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
come.. show us the power of C3 wink.gif
xixo_12
post Nov 22 2009, 07:37 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(Sib @ Nov 22 2009, 06:30 PM)
uumm, any1 can help me point out wat i shud do next for rams, nb and ht?  unsure.gif
*
does u read the guide at the first page?

it should able to help you to find out.

when u change the HTT (ram freq, HT link and NB speed will change).. u just need to know the name in your bios first.
read the first page, and i'm sure u will come with the new result.. wink.gif

This post has been edited by xixo_12: Nov 22 2009, 07:37 PM
xixo_12
post Nov 22 2009, 08:30 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
CAL? what's that? do you refer to ram or what? CL?
xixo_12
post Nov 22 2009, 08:44 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
Mind telling, why don't understand?

btw:
user posted image

Oh laugh.gif rclxub.gif
xixo_12
post Nov 22 2009, 09:11 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
since ur ram is 1066, i don't see any point why u want to tweak ur ram.. smile.gif
unless u want to push ur component to the max that the component able to run,
such as, u want to push ur ram beyond 1066..

for ddr2, best to tweak 5-5-5-15-20 and below, if wanna use cl6 , u might get higher ram speed, but likely ddr3 setting which i don't prefer...

pump vdimm, and push ur HTT like +5 .. then u ram speed will change.. either it's successful or not, based on the test..
xixo_12
post Nov 29 2009, 12:28 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(astria @ Nov 29 2009, 12:11 PM)
hi guys...

thinking of giving my 5200+ Brisbane some oc...

currently at 235MHz, dropped HT to x4, and RAM at 667MHz config...

at this config, it can boot, load windows, but would auto restart, so want to give it a mild electric shock (aka increase vcore)

but the oc menu of my mobo (Biostar TA790GX XE) is pretty confusing... on 1 hand it has the "CPU FID/VID Control", where i can set the CPU voltage between (and inclusive of) 0.800V to 1.350V, and a "Voltage Configuration:, which gives the option of "CPU Overvoltage", allowing of small increment of voltage, each step is +0.012V...

so which one should i go for first???
*
CPU FID/VID control allow you to move the volt in high interval, once you try to find more precise in volt that's the function of CPU overvoltage. (the increment so little)

Tweak it according ur need.

xixo_12
post Nov 30 2009, 04:52 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
How about reset cmos, and try again. same occur?
xixo_12
post Dec 1 2009, 05:37 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
for beginner, stick with default voltage or make it 1.35V and below.

play with multiplier only..

don't so hurry.. make it slowly..
« Next Oldest · Overclockers United · Next Newest »
 

9 Pages « < 5 6 7 8 9 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0422sec    0.25    7 queries    GZIP Disabled
Time is now: 7th December 2025 - 01:54 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.