Hi can u install granite tabletop only without the cabinet?what is the price?

pls quote me 6ft kitchen cabinet (top unit and bottom unit).

solid surface top with normal melamine swing doors (1set drawer for bottom unit)

pls quote me 8ft kitchen cabinet (top unit and bottom unit). - for dry kitchen.

Another 8ft bottom unit (have kitchen sink). - for wet kitchen

Normal melamine swing doors (1set drawer for bottom unit)

p/s: Already have concrete table top for both wet and dry.

Hello. Can u quote me two I shaped counters, both upper and lower, one 9 ft and one 6 ft. Melamine doors and 1 set drawer for lower cabinet. The 9 ft one has to have cut out for the job and hood. The 6 ft one need to put sink... One quotation for marble top and one quotation for solid surface top. Tq!

This post has been edited by modjojojo: Mar 30 2015, 07:52 PM

Dear Mr /Ms

RM 125 PFR Base Unit x 15 fts = RM RM1,875.00
RM 90 PFR Wall Unit x 12 fts = RM 1,080.00
Solid Surface is RM 165pfr x 15 fts = RM 2,475.00

Wall Side Panel RM 55.00 per pcs
Base Side Panel RM 90.00 per pcs

Please do call me if you need further assist at 017-6667838

Thanks
Regards
Dominic

Dear Mr Dom,

Can pm picture wall hang cabinet example.

And what are other cost that you charge for? I want a clear price.

TQ

This post has been edited by KepliCorn Inc: Apr 1 2015, 12:20 PM

Hi Bro, can quote me wet kitchen cabinet as per the attached sketch ?


Attached thumbnail(s)

May i know what material you prefer. thanks

Can help to suggest the material for me?This is for my Wet Kitchen

Still doing this? can quote me?

Do you cover semenyih area? Let me know..

We are manufacturer for all types of kitchen Cabinet and built in Wardrobe...

Direct Factory Manufacture
FREE idea design & consultation
Many choices of material

@ ABS Melamine ( SPECIAL PROMOTION PRICE RM 135 PFR Base Unit & RM 95 PFR Wall Unit )
@ Plywood backing Laminate Material ===RM 220 pfr
@ Modern wall hang TV Cabinet ===RM 125 pfr
@ Swing door Wardrobe ===RM 350 pfr
@Anti Jump Sliding Wardrobe ===RM 450 pfr


Please do not hesitate to email layout Plan or call me at 017-666 7838 (Dom)
or Email glazinginspirations@gmail.com

Hi we are cover semenyih and our factory at kajang

i do want to do my dry and wet kitchen cabinet with L table and top part.. can you roughly estimate price range from cheapest to most expensive?

Below are floor plan
https://thlimproperty.files.wordpress.com/2...mellia20x65.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hpho...015bbf156e37e17

This post has been edited by Ice BabY: Apr 15 2016, 05:48 PM

any showroom to visit?

Our Factory is located at kajang utama if u have any question please do call me or whatapps me 0176667838. Thanks

Our Factory is located at kajang utama if u have any question please do call me or whatapps me 0176667838

We are manufacturer for all types of kitchen Cabinet and built in Wardrobe...

Direct Factory Manufacture
FREE idea design & consultation
Many choices of material

@ ABS Melamine ( SPECIAL PROMOTION PRICE RM 135 PFR Base Unit & RM 95 PFR Wall Unit )
@ Plywood backing Laminate Material ===RM 220 pfr
@ Modern wall hang TV Cabinet ===RM 125 pfr
@ Swing door Wardrobe ===RM 350 pfr
@Anti Jump Sliding Wardrobe ===RM 450 pfr


Please do not hesitate to email layout Plan or call me at 017-666 7838 (Dom)
or Email glazinginspirations@gmail.com

Please continue your support to Like & Share our page in order to enjoy a rebate of RM500 upon your order / purchase confirmation with us!

Join now and follow these 3 simple steps:
1) https://www.facebook.com/glazingtexwood/
2) LIKE our PAGE (not the photo)
3) SHARE This post PUBLICLY[/SIZE]

Need to book for consultation?

☎️ 017-666 7838

📩 dominic@glazingtexwood.com.my
📩 marketing@glazingtexwood.com.my

Keep on sharing and Cheers!
*Terms and Conditions apply. Please contact us for more information.


Attached thumbnail(s)

hi,

how much to do a cabinet wall like the attached picture? my wall is about 15 feet long. i am thinking of 15f x 8f high wall cabinet. i have a 4f long table, it is to be part of the wall design.

Thanks
allan

This post has been edited by allanzairen: Jul 10 2017, 04:35 PM


Attached thumbnail(s)