i5 760 at 3.2ghz (200x16)
ASUS P7P55 LX
Kingston HyperX DDR3 1600mhz CL9 1.50V
stock cooler..after 20 times of LinX maxing at 70*C
Intel P55 H55 H57 LGA 1156 Core I3 I5 I7, OC and Discussion
|
|
 Dec 29 2010, 04:07 PM
Return to original view | Post
#1
|
 
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ  
|
|
Quote|
|
|
|
|
Jan 2 2011, 12:14 PM
Return to original view | Post
#2
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(apamise @ Jan 2 2011, 08:02 AM)  Load temp is 66C. I could go stable with 4.18GHz, but load temp will increase to 77C and 1.36v Vcore is needed. Decided to go with 3.99GHz (current) since I prefer not to exceed 75C on load.   |
|
|
Jan 2 2011, 08:51 PM
Return to original view | Post
#3
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(apamise @ Jan 2 2011, 12:47 PM) Nope. I just bought Zalman CNPS10X yesterday. Believe it or not, at default speed (3.2 GHz) my i3 load temp is 85C using stock cooler. That scared the shit out of me so I immediately go to lowyat yesterday and bought new cooler. u didn't press in the push pins properly?  My i5 760 at 3.2 also 70 max on stock cooler... |
|
|
Jan 7 2011, 06:26 PM
Return to original view | Post
#4
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
Why my i5 760 4.0ghz throttles the mulitplier at 74 max? I am running 1.2875 in BIOS with LLC on... issit my HSF seating problem? That is with LinX
20x200 multiplier OCCT can run at 67 max... why LinX so hot A little help here...coz I really don't like the throttling and my voltage is the lowest notch that is stable on LinX.. one notch lower and it fails LinX or BSOD I just noticed eventhough running OCCT max at 67, it still throttles... what is going on This post has been edited by ne0cz: Jan 7 2011, 06:47 PM |
|
|
Jan 7 2011, 07:32 PM
Return to original view | Post
#5
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(nicks @ Jan 7 2011, 06:55 PM) try LinX 100/200 times. myself stable with LinX, but after priming 3 hours the test fail. Hyper 212+btw, what cooler u use? Planning to reseat it tomorrow... I don't know why it throttles the speed... |
|
|
Jan 8 2011, 11:17 AM
Return to original view | Post
#6
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
Reseated the HSF... seems to be promising.. upon start up showing 36*C on the 1st core... now slowly boiling it with folding... later will try to push it to 4.0 without any throttling
 |
|
|
|
|
|
Jan 8 2011, 02:01 PM
Return to original view | Post
#7
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
gratz nicks!
will push mine tomorrow... now boiling with Folding@Home |
|
|
Jan 8 2011, 02:33 PM
Return to original view | Post
#8
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(nicks @ Jan 8 2011, 02:28 PM) Thanks, btw your 212+ using push-pull method? 2 fan single fan only... need double fan to reach 4.0?  This post has been edited by ne0cz: Jan 8 2011, 02:42 PM |
|
|
Jan 8 2011, 03:13 PM
Return to original view | Post
#9
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(nicks @ Jan 8 2011, 02:57 PM) LoL. more better cooling with extra fan. u have no idea how hot it is for your proc when reach 4GHz. Vcore maybe 1.35 and above. I can keep it under 1.35 for 4.0...but it throttles..means too hot already...but 75 only at LinXaround 1.28 can already Hey..my processor throttles at 73 max...can I off the Intel TM? I can't get it at 4.0 constant This post has been edited by ne0cz: Jan 8 2011, 10:01 PM |
|
|
Jan 11 2011, 07:58 PM
Return to original view | Post
#10
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(seanlimys @ Jan 11 2011, 07:24 PM) off all thermal settings I gave up. Currently running 160 bclk with speedstep and turbo mode on... Suprisingly if below 4.0 the voltage is very low...currently 1.136V in CPU-Z with p95 running.Save some power as well  |
|
|
Jan 14 2011, 04:06 PM
Return to original view | Post
#11
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(RattleSnaKe @ Jan 14 2011, 03:07 PM) I am curious because I am running 1.407v on my msi P55 GD65 with an i5-750 at 3.8Ghz (200x19) and a VTT of 1.361v. Is the setting allright for continuous use or i should raise the VTT and lower the vCore? The temps are quite low, around 75C with my Hyper 212+. weather getting hotter and hotter... My GPU keep speeding up the fan and lowering it back I think your voltage is too high for 3.8ghz only |
|
|
Jan 15 2011, 12:07 PM
Return to original view | Post
#12
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(RattleSnaKe @ Jan 15 2011, 11:41 AM) The Vdroop happens in LinX more noticibaly. It only drops to 1.360v in p95. And is p95 stable enough? Or I need to pass the LinX test too? P95 is normal stability testing. IMO I think LinX is very fast and also pushes the proc to generate more head than P95 can... LinX pushes my 3.5 OC to 62C in 20minutes... Prime95 only can push to 57 after more than an hour |
|
|
Jan 19 2011, 10:26 PM
Return to original view | Post
#13
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(hafizul88 @ Jan 19 2011, 07:48 PM) Hi, just wanna share some screenie i3 seems like more overclockable than i5... i3 530 clock at 4.2GHz   |
|
|
|
|
|
Jan 20 2011, 10:10 AM
Return to original view | Post
#14
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(hafizul88 @ Jan 20 2011, 08:19 AM) Really? But my friend once said the highest he can achieved is 4.25GHz. He uses i5 750 perhaps better air flow and ambient temps... |
|
|
Jan 20 2011, 10:18 AM
Return to original view | Post
#15
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(hafizul88 @ Jan 20 2011, 10:17 AM) Emm. But he use better air cooling. Prolimatech Megahalem the best air cooler vs best value air cooler |
|
|
Jan 20 2011, 10:43 AM
Return to original view | Post
#16
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
I chose CM Hyper 212+ because I m pokai only
|
|
|
Feb 5 2011, 12:16 PM
Return to original view | Post
#17
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
now I play RAM tightening.. tRFC at 72 from 89 stock... what do you think?
9-9-9-24 to 6-9-6-24... I think I am good... lol No voltage increase whatsoever |
|
|
Feb 13 2011, 03:24 PM
Return to original view | Post
#18
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(Duckies @ Feb 13 2011, 11:33 AM) Yes it is.In fact,Core i3 is the most overclockable CPU for the 1156 socket.It can reach 4.0 Ghz and above easily with CPU cooler. I wonder how well it will do in the LGA1155 socket... i7 so easy go to 5ghz... i3? forgot...SB can't OC without K series *edit* it seems like going to have a K series i3  This post has been edited by ne0cz: Feb 13 2011, 03:38 PM |
|
|
Feb 15 2011, 01:21 PM
Return to original view | Post
#19
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(hafizul88 @ Feb 15 2011, 09:21 AM) What VCore do you use on your 4.27GHz setup? wow god like 900mhz on your GTX460  my mosfets are not cooled. Scared. So now I run 1.4 to 3.36 |
|
|
Feb 15 2011, 02:09 PM
Return to original view | Post
#20
|
|
Senior Member
5,372 posts Joined: May 2008 From: Nokia HQ
|
QUOTE(hafizul88 @ Feb 15 2011, 01:32 PM) I'm thinking of OC it a lil bit more what voltages you using?Added on February 15, 2011, 2:09 pm QUOTE(hafizul88 @ Feb 15 2011, 01:32 PM) I'm thinking of OC it a lil bit more what voltages you using?This post has been edited by ne0cz: Feb 15 2011, 02:09 PM |
| Change to: |  0.0306sec
 0.67
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 05:07 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.