well count me for m3f/dfi ut p55, i7 870 , dom gt.

yup for most ppl.

three reasons.. for me not posting

one the m3f/dfi unit is a borrowed unit and need permission
second havent got a waterblock for the 1156 socket yet
third reasons.. theres some skew issues with elpida hypers. i will be getting some bbse this weekend.. dom's 2200 c8 and adata 2200 c8

most stressfull is prime95 x64 25.9 blend 5.4gb in windows diagnostic mode
u need to pass min 8-12 hours

take note u can pass linx even 100 runs but will fail the above

y u think in xs less than 20 ppl only has posted in the thread... its that hard.. as it will cycle ure pwm's capability
linx stress is like a off and on switch every 4-5 minutes..
the above is talking 8-12hours straight 100% load

cheh.. hmm wheres that 2300 C8 posting of mine lol..

http://forum.lowyat.net/index.php?showtopic=1024368&hl=

http://www.xtremesystems.org/forums/showth...070#post4040070

so hmm the demo board i burned.. i wasnt the only one..

the demo board i tested died..
cooler used was megahalem

opened up the cpu es version and pins was burned at the same place
all happened after prime 95 3.4gb load test at 2.2k C8.

bclk 230 multi 21 ht oFF
vcore 1.5v
vtt 1.4v
dram 1.65v
dram 2300mhz CL8 tRFC 110 rtl 62,66,68 b2b 4

prime 95 3.4gb after 4 hours failed.
reboot and thats about it for the mobo.

temps 83C, max for core 1.

asus m3f test sample
860 ES
and my dom gt two sticks

for high mem clocks
cpu tweaker doesnt help
other than helping tweak the main timings

the subtimings doesnt do much good other than rtl's
and rtl's is based on voltage ratios and dram chipsets.