Thanks

i wonder hows the temp others get with their megahalems on high ambient temperature.

there's ntg much u can do actually if the ambient temperature is already high...

can this ram Corsair 4gb(2x2gb) XMS3 1600 mhz CL9 use to i5?

check the voltage.. is it 1.65v?

its 1.8v...cant reduce d voltage in bios r?

the spec is 1.8v for the ram at tht speed. u try to lower down the volt ur ram might not be able to run at the stated speed. because all this 1.8v ram are actually o/c'ed ram. thier native speed are much lower.. mayb around 1333mhz nia

This post has been edited by WhitE LighteR: Dec 8 2009, 02:16 PM

it is bad to run 1600mhz at 1.8v?? coz my dominator run at that speed and 1.8v??
btw it is a default voltage for my RAM i think...

yup.. it default speed for my ram too. thts y i advicing others not to make the same mistake i did. 1156 was spec wit ram running at 1.65v. ram manufacturer now was force to come out wit 1.65v version to comply wit this standard. this 1.8v one are all o/c'ed version of slower speed. thts y they need 1.8 to achieve the claimed speed. u might as well be safe and run at 1.65v so at least u hav room to up the vdimm if nessasry. unlike us we are already at 1.8v. how much somemore u wan to up the vdimm? 2.0v? siao....

This post has been edited by WhitE LighteR: Dec 8 2009, 09:41 PM

so that means we cannot oc this dominator more than 1600Mhz ah bro??
omg not good lah...

can.... tengok how berani u are la.. i able to run it till 1700mhz @ 1.85v

then i takut d

anyhow im depointed lor.. coz now i cant run at 1600. no matter wut i do the ram dont wan to run at high bclk. max out around 180 @ mem ratio 4

This post has been edited by WhitE LighteR: Dec 8 2009, 09:55 PM

Ermm i using msi p55 gd80 + i7 860 + Ocz pc10666 ddr3 1333mhz.
issit ok for me to Overclock my ram to 7-7-7-20 1448mhz but i set the voltage to auto..
Seems to be running ok but isssit ok to leave the voltage AUTO.
TQ..

haha...like that aa bro...
i think we must buy the dominator airflow 1st la...then can oc da ram kaw2...
try 1866Mhz@1.9v la bro?
me i dont know yet can run at high bclk or not when i OC the proc later...

auto means it will read the n use the default speed. if u wan to o/c u might need to up it a little.

---

Added on December 8, 2009, 10:25 pmits either my proc problem or ram. i duno which one

This post has been edited by WhitE LighteR: Dec 8 2009, 10:25 PM

[quote=WhitE LighteR,Dec 8 2009, 10:24 PM]
auto means it will read the n use the default speed. if u wan to o/c u might need to up it a little.


Oic..
but i oc put auto voltage is no problem, but some said should not put auto.
anyhow TQ..

my ocz same rated speed as your running at 1520Mhz@9-9-9-21 with 1.6v when put to auto.
my timing abit loose though.

"RAM Speed : 712.3 MHz (2:10) @ 9-9-9-24"
as stated by CPUZ.
why is it 712.3MHz?

You need to x 2 w the value from CPU-z.

-pWs-

times 2?
and y is that?
sorry, noob here.

Hehe. Google "DDR" bro.

-pWs-