on the way! on borrowed value rams now so can't do anything yet.

antonio: should've bought the full atx pegatron la.. my mobo looks so small... =(

ok first try for hwbot with my i3 on value rams:

-tze- | Win 7 x86 | i3 530 | 199 x 20 | ASUS MaximusIIIGene |1GB DDR3-1333 cl9 | DDR3-1600 9-9-9-24



idles @ 35c & load on p95 @ 50c

---

Added on January 14, 2010, 4:38 amabout the same timings i had with my i7 860 @ 4.0ghz with stock ram settings. so i hope with better rams can shave off a minute plus..

This post has been edited by -tze-: Jan 14 2010, 04:38 AM

Bonchi: haven't tweaked anything yet. this weekend la i'll do it.

tech_frix: will fine tune later on.. not quite sure what vcore to get it to boot, bantai jer. running on corsair H50 with 2 fans push pull setup. as i'm getting good temps for this proc i find no need to setup a WC system. save alot of cash there, can buy my ln2 pot. =)

sup3rfly: whats the highest bclk that you could boot at? could u try 250blck x 16?

This post has been edited by -tze-: Jan 14 2010, 01:59 PM

kino: ko try dulu la.

sup3rfly: owh. same thing happened with my i7 so i sold it off. i tried booting up at 220bclk but i guess not setting the right voltages.

tech_frix: sell it n buy an i3. lol!

i guess the i3 is good value for money as the price is as much as a used e84 and performs better. even with value ram on 32m is 2 minutes better than c2d.

i3 on 4.5ghz pass 32m

temp was at 43c idle, load of 40% at 51c. didn't prime it.

ezzy: nope. ur settings cannot boot for my proc. thinking of buying the h55-ud2h. seems like a good mobo.

ezzy: kaw2 la bro! later tonite i test with h55m mobo! =P

antonio: bought from ALL IT lyp earlier for RM 399.

ezzy: rm 399

tech_frix: the g.skills not so easy to tune. took 3 hours to shave off from 10m 20s i3 @ 4.0ghz to 9m 20s. now got new mobo gonna try tomorrow.. running on the intergrated graphics so can only support up to ddr 1666.

Jibek: best bang. alang2 abg nak buat make up pc jer baik pakai i3. =)

clawhammer: excellent temps!! can push further?

Jibek: selamber jer bang push for World Record. challenges x ramai lagi ni.

http://hwbot.org/hardware/processor/core_i3_530

facing problems with my h55m-ud2h. 4.0ghz also can't boot.

sigh i just suck at oc-ing. can't seem to find any reviews nor forums that discuss this mobo tho.

but its got a lot to do with the ram. my 32m score is tied with my previous i7.

cheaper mobo, cheaper rams and i got better timing!


btw ezzy, i beat ur timing d!

This post has been edited by -tze-: Jan 20 2010, 01:50 AM

Jibek: where's yours?

i cant run 2000mhz coz using the onboard gpu. =(

Jibek: EVGA ftw? this score i got is better than p55 mobo. dowan change yet. for now, budget setup!



This post has been edited by -tze-: Jan 20 2010, 03:55 AM

not at this speed. actually can. but i must sacrifice on QPI. which i don't want. coz lower the qpi, my 32m score becomes worse. so i don't find any point in sacrificing qpi.

the guy in 2nd place sacrificed qpi for 4.88ghz but running his rams at 1333mhz only even tho he's running 2000mhz ripjaws.

http://hwbot.org/community/submission/9463...9min_0sec_203ms

he also sacrificed 2nd core and ht. mine is still on.

This post has been edited by -tze-: Jan 20 2010, 04:06 AM

ezzy: yay ada fight! susah tu 4 seconds. =(

we're using the same rams la bro. here u go



This post has been edited by -tze-: Jan 20 2010, 04:10 PM

law1777: clawhammer n ezzy are using water. i'm using hyper 212+ only. if u need wc parts, can bug clawhammer. he's very accommodating wan. =)