yup i got the maha chargers as well from KLPF.
so the refresh & analyze took 12 hours !
so i will try my dead nimh on this charger

Imedion with that Wizard MaHa chargers is superb.

anybody willing to buy my black Novatac 120T modded with SSC P4 U2SVOH + UCL lens for RM450?

wah! susuman nice job you are still on hari raya annual leave

i just love the new Catapult - that would make the MD4 Wildcat to shame in terms of price and multi modes but built quality is hard to beat the malkoff devices.

please suggest them to use GPS from now on.this type of delay is unacceptable for a courier company.

i want to see that Quark Ti up-close

wow Quark Turbo is nice.
check my signature for stuff to let go

Preon XP-G R5 is UP - http://www.cpfmarketplace.com/mp/showthread.php?t=202316
160lumens OTF with only 2xAAA
Preon I Specifications

* Twist-type interface
* Dimensions:
o Length 2.8in
o Diameter 0.6in
o Weight 0.4oz (aluminum)
* Output modes:
o Max 70 lumens OUT THE FRONT (yes we love all caps, sorry; please cover your ears)
o Low 0.4 lumens (OTF)
o Medium 11 lumens
o Special modes (hidden away, it's there only if you look for it - see manual)
o Strobe
o S.O.S.
o Beacon Hi
o Beacon Lo (longer running)


Preon II Specifications

* Clicky-type interface, twist optional
* Dimensions:
o Length 5.0in
o Diameter 0.6in
o Weight 0.8oz
* Output modes:
o Max 160 lumens OUT THE FRONT (yes we love all caps, sorry please cover your ears)
o Low 0.8 lumens (OTF)
o Medium 24 lumens
o Special modes (hidden away, it's there only if you look for it - see manual)
o Strobe
o S.O.S.
o Beacon High
o Beacon Low (longer running)



All Preons will packaged in an elegant gift box (ready to be gifted) and will include the following:

* Batteries (who says we don't take care of our customers? )
* A keychain ring that takes place of the clip
* Spare o-ring
* Instruction Manual


3. UNIQUE FEATURES

* Absolute state-of-the-art LED technology, not last years' technology
* Proprietary hard-coat technology
* Unique and elegantly simple User Interface (UI)
* Interchangeable heads, tails, and bodies
* Extremely sturdy, removable clip
* 10-Year warranty

The new Fenix PD20 & PD10 is not bad either that comes with new knurling body but my NC D10 SP R2 UI is the best so far in this category plus it can accept AW14500 unlike the Fenix which will go direct drive which is not good for the XPE emitter - YMMV

The E2DL & the Eagletac T20C2 Neutral beamshots are impressive.

anybody will do a group buy for iTPlight A1,it's only RM100 in US.Only 6cm tall
http://www.batteryjunction.com/itp-a1-flashlight.html

This post has been edited by surefire v LED: Oct 30 2009, 03:20 PM

waiting for my XP-G R5 on 10mm pcb to arrive,once arrive my old scholl L2D CE will have a new eye
i send back my M60 to Malkoff Devices due to a dark spot in the middle - i request for a replacement and this time it's not for the M60 but the elusive M30
pitty my VME Head now that it is sitting silently alone

i want that Xeno cube warm tint
and i want the Thrunite drop in XPG-R5,
any GB?

This post has been edited by surefire v LED: Nov 3 2009, 10:31 PM

they are tiny ( the XPG-R5 )

actually i already put them in my L2D & my Novatac and wow how bright they are especially the Novatac.
In the Novatac it is so bright that i'm afraid it might blow out but it didn't.
In the L2D it is bright also but the smooth reflector in the L2D is not as good as the reflector in the Novatac.
But they are still unfinished as i have to put them under the sun so the Arctic Alumina will completely dry.
Next up is to transform my Mag 2D to have this XPG-R5 in it

guys,
the mod went on smoothly on both ( L2D & Mag 2D )after both of them have a really good sun bathing
well my soldering is not that good due to lousy solder iron ( yeah right )
but it turn out well - sorry guys the photos later im really tired
The L2D head was open using bare hand with rubbery mouse pad - i have open many Fenix's head with this trick P2D/P3D/P1D CE/P1 etc.
Now the L2D no more fogging inside the reflector even power it up with 1xAW14500 + AA dummy but the L2D lens & reflector don't do justice on the XPG-R5 but not too shabby vs the Cree XRE R2.
Now the Mag 2D mod is using the XPG-R5 from cpfer R@ndom - http://www.candlepowerforums.com/vb/showthread.php?t=245629
The mod component that im using are :-
1.Heatsink from H22A - http://www.candlepowerforums.com/vb/showthread.php?t=160483
2.MOP reflector from Kai domain - http://www.kaidomain.com/CategoryPage.aspx?CategoryId=44
3.1A driver from DX - http://www.dealextreme.com/details.dx/sku.1885
4.Shark-sink D for the driver from sandwich shoppe - http://theledguy.chainreactionweb.com/prod...roducts_id=1163
5.UCL lens 52mm from flashlightlens.com
6.26 AWG silicone wires - http://theledguy.chainreactionweb.com/prod...roducts_id=1193
7.Artic Alumina from sandwich shoppe or 4sevens.com
8.Mag Golden shorty tail spring - http://www.kaidomain.com/ProductDetails.aspx?ProductId=1734
9.AW C li-ion cell + AA dummy from AW.
10.D - C - AA cell adapter.

And the results on the Mag 2D XPG-R5 is well worth it and PRICELESS!!
The hotspot is so intense for a tiny emitter and this thing can really throw - i now named it the Malkoff Replica Mag 2D drop-ins
So now i don't have to buy that famous drop in from Malkoff anymore
Sorry guys like i mentioned earlier - photos later + some eye candies

---

Added on November 7, 2009, 10:25 pmHere are some eye candies.The beamshots was taken 12 feet from the wall.
List of lights :-
1.Quark Regular 1xAW17670
2.Quark Tactical 2xnimh Imedion 2100mA
3.Nitecore D10 SP XPE R2
4.Fenix L2D XPG-R5
5.Mag 2D XPG-R5 - the spill is bluish due to the UCL lens blue coating 99% light transmit.











i didn't take the photos of the Mag 2D guts but here are some of it of the business end
or it will look something like this












This post has been edited by surefire v LED: Nov 7 2009, 10:35 PM

looks similiar

---

Added on November 7, 2009, 10:39 pmi real life the Mag 2D XPG blows away the other 4

This post has been edited by surefire v LED: Nov 7 2009, 10:39 PM

I'm in Sg.Buloh onli
i'm not fimiliar with Tiablo.
If swapping the emitter on a pcb board is fine but to swap the bare emitter is a pain in the ass to solder the Cree XRE but SSC & K2 emitter is easy

Thx all for the kind words guys
In real life the tint on the Mag 2D XPG lean towards warmish tint but the spill is bluish due to the UCL lens.
And yes i love the L2D XPG - and its growing
Yes the 26 AWG wires are preferred because it can take high heat but 24 AWG is better,i have them coming maybe next week.Normal wires are ok but it will get corrode or dry in the long run due to heat and on top of that the body insulation too thick that it can't go through some small holes for wiring,the copper wires are hard to solder and hard to bend.

Last night i try it outdoors,man this Mag can throw even in heavy rain and easily light up to 1K feet = 304.8 meters and it can go further with stock smooth reflector.

---

Added on November 8, 2009, 7:15 am

This post has been edited by surefire v LED: Nov 8 2009, 07:15 AM