finally finished my external WC setup .. well required to do a bit of modding (a few drills on the case but it wasnt a problem), i removed the acrylic btw..
case is a TJ09 B-W, the pump is drilled to the table

i used a dremel for these stuffs and imo, the dremels is an efficient tool for easy stuffs like this , light and flexible









*edited the pics.. added CCFL's now hehe =D

blocks : Swiftech APOGEE GTZ SE LGA 1366 + BACKPLATE (for core i7) + OCZ Freeze
rad: Feser X-Change 360mm
tubes : Feser Tube 1/2" ID 3/4" OD UV (10 feet.. used like 7 feet edi haha)
pump: Swiftech MCP655 + D5 MCP655 Bitspower Modkit + D5/MCP655 MOD Top Acetal
res : EK-Multioption RES V2 250 (295ml)
others: 4x G1/4" High Flow 1/2" Black Sparkle Bitspower Compression Fittings (2 in each set)
koolant : battery water
fans : 3x Silverstone FN-121 BL (blue LEDS with 55CFM @ 21dba)

i was using a lapped TRUE Black + silverstone FM-121 last time
idle : average 45
load with prime45 small ffts : minimum 76

now

idle: average 45 (probably lower)
load with prime45 small ffts : minimum 66

if only i use a better fan, temps could drop up o 5-6C.. just can't stand the sound

settings: 4.2ghz [200 BLK x 21 ] 1.350 vcore.. C0 chip.. HT off.. ambient around 23C

gonna buy a bigger Resevoir + R2E X58 NB/SB block later hehe.. not sure about cooling my GPU.. dunno if i want to waste money on a gpu block or for the new dx11 cards

results uploaded


ambient is around 23C.. no way im getting these with my TRUE.. not with LINX.. LINX = 80C minimum at the same ambient... fans use are the Coolermaster R4's, 3 of them in a push configuration..

This post has been edited by reiben05: Aug 13 2009, 12:29 AM

Nice looking stuff there. How much is the total cost if i may ask. Planning to go for WC too.

a lot haha.. including shipping .. RM2600 +/- .. screw the shipping D:, its better if u know someone who is in the States and they can ship it for u =) .. if not just order from someone here if ur not familiar with international shipping (clawhammer/acther)

This post has been edited by reiben05: Aug 5 2009, 08:20 PM

I see battery water... huh?

battery water = de-ionised water = distilled water ? D:

You say you buy from US.. Why? Isit cheaper there?

well.. item is bought from there.. w/o shipping of coz cheaper =/? btw i bought mine thru people.. acther

I was planning to buy the WC from a forumer here but my wallet didn't let me.. sob....

lol its okay.. take ur time =).. save up slowly.. took me 2 months to save + do some major investment (sell parts i dont need) for this... now im broke haha xD..

nice bro!! Can PM me your w/c supplier?

jz contact clawhammer
he is the best!

that looks horrendous.

really messy and ur gonna have alot of fun when it comes time to cleaning/moving the case..

wat in gods name possesed u to do such a thing?

would have been much better if u just mounted the rad on top of the case.

who is clawhammer? one of the user?

Current WC Supplier in LYN:bryanyeo87(Mod,Safe Trader),acther and clawhammer(VIP)

thanks bro i will looking for them

lol +1 for the messyness, can't disagree with u.. wanted to mod it and place it on top but erm, lack of proper equipment, i tried it once but scared the rad might fall off (who knows).. i would need an aluminium shroud (360mm in length) to mount it on top since the TJ09 isnt meant for triple rad's...

U r forgetting one more person which is nej....

i tried to contact nej a few times somewhere last week =/.. couldn't get to him..

Hav u tried his new number??? The old one is discarded already....

EDIT: I believed that he forgot to update his number.... If u need it, drop me a PM.....

This post has been edited by Aura: Aug 6 2009, 05:49 PM

lol no wonder .. even dropped him a few pm in the forum also, no response

nice wc built, y dun built it internally ? more nice looking and some mobility to ur casing eh ( easy to move when need to be move )

anyway nice built and great wc specs u have...

share some clear pic in the wc section as well, really wanna see overall of ur built...

This post has been edited by lichyetan: Aug 7 2009, 10:32 AM

thnx =).. problem is i got no space to mount it internally or i need to do some major modifications.. pics not clear enough?? D:?

haha, show some pics with daylight, all seems to be night shot(shot in dark)

bro,i like ur water block.
look nice la

haha actually the picture shot is in the evening with closed curtains and flash off.. btw i dismantle my tubes atm.. waiting for a clear tubing and chipset block.. already broke T_T.. only will be using a swiftech nb block.. not the full coverage one like koolance/bitspower.. and the fans on the rad, changed it to Coolermaster 90CFM fan (70CFM in real life).. will look nicer since it has led, blows more air, and looks as same as the rad xp

---

Added on August 7, 2009, 4:53 pmhehe thnx =)..

This post has been edited by reiben05: Aug 7 2009, 04:53 PM

2.6k ?
omg dat's expensive i'd say .

i know.. will be adding a HD4870x2 waterblock + Swiftech NB/SB block later.. and also, will be changing the tubes to a transparent one..

no i mean expensive like , EXPENSIVE !

yalo bro...y don u put all of ur parts inside?
it sure looks nicer de ma...i thk it's casing problem
never thk of moving full tower??

TJ09 is full tower la >.<"
maybe d casing not really good for WC setup ?
unlike TJ07 wan . it's meant for WC setup really nice ^^,

nice

well i think u can squeeze the rads into the case.. just measured.. maybe later if i got time.. i will adjust it..

Ops~
sry 4 my mistake
not reli pro in silverstone casing
bside tat, TS's photos got abit dark
1stly i tot it was CM690
so TS, do u thk 2 move evthg into ur casing??

not TJ10 meh?

yeah can.. the pump, lower area in front of the PSU.. resevoir on the bone beside the mobo tray and rads above.. just need a better drill then a dremel to drill thru thicker aluminium.. and might take some time also.. btw i changed the position of the rads.. placed it ontop of my casing now xD..

TJ09 and TJ10 looks almost the same inside.. just the front is different

This post has been edited by reiben05: Aug 12 2009, 11:39 PM

dremel shud be enuf for drilling through aluminium la .

so u done it or haven done it??
once u finish, jz remember to spam ur photo here
wif sum clear photos ya

Nice set up there bro....Your radiator is huge....no ddoubt