My rig as below:-

Proc: E3110 EO (VID:1.25)
Mobo: Asus P5Q Pro
Ram: 2 x 1GB Crucial Tracer LED DDR2 800
2 x 2GB Kingston HyperX DDR 1066
GPU: CF HD4870 (Gecube and Sapphire)
PSU: Silverstone Evo 1000watts

I just can't get stable to overclock to 4Ghz, I'd tried 500*8, 9*455 and many other combination.
I'd already disable all the power safe function.

Can someone advise my on the setting for my E3110 EO on my P5Q Pro. I'm new to 45nm.

Pls advise the voltage that I should use.

This post has been edited by k3et: Aug 4 2009, 07:51 PM

Have you checked, if you have your tRD adjusted? as well as the mem divider?

My final setting was at below, sifu pls give some comment:-

Vcore: 1.33125v (CPUZ idle 1.312v load 1.320v)
PLL: 1.54v
VTT: 1.32v
GTL: 0.63x
NB: 1.40v
Vdimm:2.20v

9*445 - 4005mhz
DDR1116 @ 5-5-5-15
Ram performance level at 10
LLC Enable

---

Added on August 5, 2009, 12:38 amAny sifu can help?

This post has been edited by k3et: Aug 5 2009, 12:38 AM

wow your VID is quite high
my vid is 0.9875 oni require 1.2v to 4ghz
i think u need pump more voltage