Aug 8 2009, 10:59 PM
QUOTE(his @ Aug 7 2009, 01:47 PM)
Hey guys
New update from m havoc wreaking PC
Below r the testings
FSB : 400
Multiplexer : 8.5, 8, 7
FSB Strap : 400
Dram Freq : Auto
Dram timing : 5-5-5-15
Vcore : 1.306
gtt : 0.370 / 0.410
pll : 1.52
vtt : 1.24
dram volt : 2.00
nb : 1.22
It runs perfectly but if i upped the gtt to 0.400/0.410, it wont run anymore
Second setting :
FSB : 410
Multiplexer : 8.5, 8, 7
FSB Strap : 400
Dram Freq : Auto
Dram timing : 5-5-5-15
Vcore : 1.326
gtt : 0.370 / 0.410
pll : 1.52
vtt : 1.24
dram volt : 2.00
nb : 1.22
It doesnt run and even when i upped the gtt to 0.400/0.410, it still wont post
It will only post when i stay below 410fsb and gtt at 0.370/0.410
bro why don't you up your vtt and nb voltage slightly and slowly to see if it does the trick. coz from what I can remember, those 2 looks kinda low to me. I suggest up with the nb first. use the bold'ed setting, but only play with the nb (first) and vttNew update from m havoc wreaking PC
Below r the testings
FSB : 400
Multiplexer : 8.5, 8, 7
FSB Strap : 400
Dram Freq : Auto
Dram timing : 5-5-5-15
Vcore : 1.306
gtt : 0.370 / 0.410
pll : 1.52
vtt : 1.24
dram volt : 2.00
nb : 1.22
It runs perfectly but if i upped the gtt to 0.400/0.410, it wont run anymore
Second setting :
FSB : 410
Multiplexer : 8.5, 8, 7
FSB Strap : 400
Dram Freq : Auto
Dram timing : 5-5-5-15
Vcore : 1.326
gtt : 0.370 / 0.410
pll : 1.52
vtt : 1.24
dram volt : 2.00
nb : 1.22
It doesnt run and even when i upped the gtt to 0.400/0.410, it still wont post
It will only post when i stay below 410fsb and gtt at 0.370/0.410
This post has been edited by metsatsu: Aug 8 2009, 11:02 PM
Quote
0.0159sec
0.99
6 queries
GZIP Disabled