did u save the changes before exiting the bios.

even if he disable it the OC setting should stick.

---

Added on July 31, 2009, 9:34 pmbtw try increase the processor vcore to 1.4v,loosen the ram timing to CL5,increase the nb voltage to 1.3-1.4v and set the vdimm to 2.1v.

try it and see if the setting stick this time around.

This post has been edited by hilmiangah: Jul 31 2009, 09:34 PM

this is a factor too.

while some board just hang or beep endlessly.