just wanna ask u all....what is the different between racing boy footrest and yoshimura footrest??? and how about the price?

hello...if u wanna tip bout ur bike u also can go to malaysianbikers.com.my....
very good in there..
they also organize ride there....

This post has been edited by mf_yamato: Sep 13 2009, 10:15 AM

yea, using it on my bike now. looks attractive but not too bright until it can lights up the road infront.
been using it for 3 months, so far so good.

try to look at the garage sales there, use the keyword 'T10' since it's the size of the LED's base which can fit in nicely in our bike's aux lamp socket
try to opt for those high flux LED one (not those usual LED bulb) since it's brighter and last longer.

Bro that T10 LED light can be use to light up the meter light ma? coz 1 of my LED bulb blow off d so now plan to buy new 1 and put the remaining bulb on the meter light.

haha, rot liao then change to R6.

its a 250-IN 250-OUT camshaft.
1mm higher lift on IN and OUT.
Overlaps a lot. stock is 30 degree, this one is 100 degree.
My guess is, this cam flatten the torque over a broad range of rpm. Peak torque will decrease, but the power curve will be very smooth. 250 deg duration is pretty good, not too high not too low.

by the way, I saw your camshaft. Bee Hock has helped you to get the mold done pretty well.


No brand one. It's from Thailand. The angle is nice, so far in Penang, most of the other camshaft will make the engine sound. This one won't. The overlapping is nicely done, symmetric. -50 deg TDC for IN, and 50 deg TDC for OUT.

yup.. not a problem.. some jz use bak stock wit some modifications

---

Added on September 13, 2009, 11:23 pmizt?? long time never update on the progress.. coz he was seem to be very bz... so i told him to take his time... hw's the progress?? any idea when will be ready?? wat bout ur cam bro??

---

Added on September 13, 2009, 11:27 pmseems to me its the "low type" of the high cam range... hehe.. wher did u see tis charge? wats the price like?

This post has been edited by saranjeevi: Sep 13 2009, 11:27 PM

is there any LED head lamp sold???
sound interesting........

Bro u fix that cam alrd maa?

He has been practising to mill the camshaft to the perfect condition. Now finally can ady. I dunno when he is starting the actual milling, but the camshaft angle is basically done.

I see that 250 degree cam in Bee Hock. This is an all range cam, my guess is, it can rev from 5000rpm all the way to 10000rpm. 2000rpm to 4000rpm will have less power compared to stock.

Not yet, else ady post result lo, not js speculation, haha

want to ask u guys... ron95 work with 135LC engine?

of coz la.why not?but with 97 can get better performance.

Ei did u guys notice tat ron95 is quite busuk?? N did u guys heard about v-power is bad for LC?? Two mega fortune guy told me tat.. Lastime when my bike siao siao when rev it high i go find mega fortune de indian he ask me whether i use v-power or not.. and when i bought my bike, the guy with spec tell me not to use v-power he say if u did, u will have engine dmg or wat blah blah.. and nid to overhaul ur bike..

yeah, the lamp socket for aux lamp and meter light is the same size.
so T10 bulb can be use on both

but make sure you bought the LED as in my previous post because it will lights up the meter brightly.
if buy the another type (the LED all point forward, not surround), then only small portion of the meter will be lighted up.

no problem since most bike could use the lower RON92.
but heck, I think my ride become slightly sluggish when use this RON95

but is it safe to use ron95 on high compression engine.. like those with shave on blok/head..??

---

Added on September 14, 2009, 5:36 pmoh k.. tot if he could finish early, mayb i could hav a ride to kl 4 deepavali... thx 4 d info man... jz keep me updated aite...

This post has been edited by saranjeevi: Sep 14 2009, 05:36 PM

This is bullshit.

I am using Caltex Techron RON95. Performance same as RON97.

RON95 is absolutely fine with my higher compression engine. I'll let you know when it is done.

wanna ask la if anybody wanna sell 2nd hand full coverset for lc clutch. local set + scratch + mix colour don't mind but don't want the broken 1 oredi. budget is estimated around rm80 (depends on the condition, can add la the money). kl area

i hav.. dunno local or ori..
buy it rm200..
black color..
but at handle cover already calar..
and also at side of signal lamp..
want?


This post has been edited by budakmentah: Sep 14 2009, 11:12 PM

Hi guys i got sell car Head Set Unit ( Stereo ) from Pioneer. All new !!! got warranty from Pioneer Malaysia. So no need to worry if got problem can find me back i can send to the factory to check. Other brand also have but price not so good laa coz my Pioneer i got more Quota. So anyone interested can click on my signature below and pm me for the price and the model u want. Thanks!!! And Sorry for the off topic

This post has been edited by TryX: Sep 15 2009, 12:27 AM

how much wanna sell??? if it is in the budget stated, i'll take 4 sure!!!

This post has been edited by blue_decamax: Sep 15 2009, 03:13 AM

Anybody using voltage stabilizer to their LC135? I think of getting one Zaptor Gold VS to install to my sweet white blue LC...