cum cum go genting~
then dun care lo~
not tat his shop got only~ 
fetch me also~ 

Hi bro all, just want some consult, my wira 1.5se right, when I bought back new that time the wheels and steering was all good, wheels can go straight when I put the the steering straight without moving it.

After 1 fine day when I was speeding, out of sudden then didn't notice there was something on the road, I turn my steering left/right/ to avoid that and left right again to try to pull back the car back to middle of the road to avoid accident knocking the divider. then when I was out of control, brake hard and luckily the car stopped and didn't knock the divider. But there is a sound 'kong' on the front wheels. not sure which side left or right wheel.

Now my car when I put the steering straight, the car can go in straight line but oftenly the car wheel will lari abit from the straight line itself which I think it's dangerous. Allignment and balancing already been done but still same thing. I not sure whether is the front wheel kaki already koyak or what. Or anything you guys can have any idea. I'm not a car pro. Please advise.

VDO ecu can be rechip???

Yea wei, now I drive at 100kmh also must pay damm good attention. That day send to the tyre shop, told them I had this problem, they check and say nothing wrong. kns like that. I feel they damm newbie. So I give up on repairing.

But a bit sayang 5 years car only.. My car has a good F/C 420-450km for rm65 fuel. Suspension kit all changed, light weight tryes taiwan type bronze with new tyre Falken 912ze. Exhaust all changed. Timing belt and major service done. Everything is so perfect and this stupid wheel things come kacau.

eh, WiSE's muffler is s-flow or straight-flow? 
what about the piping size? curious only...  i still havent change my muffler 

[attachmentid=1182214]

Using APM performax abs and spring. But a bit stiff lor. But still ok la when using 195/55/15 to compensate with the stiffness.

The rim Taiwan one, use for 5 years edi, usually 1 year I will go allign and balancing 1 time. Cause from the pass history, there is no problem at all with the rim, got run also a bit only +/- 5/10 like that. Also no bengkok found after driving for 5 years.

The exhaust year, take out the caton, replace the bullet, and muffler cause the old one last time keep knocking the road bumper then karat on stock suspension. So far like the lowest base sound type at least don't look/feel like a beng car. =)

If your car is auto go for S flow or those loop one, more power I think. Straight is good for pick up but top speed will decrease, suitable for manual. I changed mine, aluminium bullet, aluminium muffler and piping (from bullet to back) to white steal pipe (recomended). About rm500 alltogether, then the ori caton, can trade in for rm100 I think. so paid rm400 for the job done. =)

i always send to ipoh for service. Here i try go to pusat servis. i ask them just to set the timing higher they said cannot just set the timing. Must service all and clean TB.... then i just walk away... 

alvin, still dunno how loud/silent is your current muffler    curious la

same oh.. last time i wanna adjust my auto shift gear range higher.. then they also ask me clean this, change that, flush radiator..
phreak ass.. wanna earn my money and think im bongok or something. 

tats y scary la.... its always good to know what is wrong (or could be wrong and related) to our car problem before send for repair... else kena cut arm n leg 

yea lor, don't kena potong lor, I did mine, major service including change timing belt only rm600. rm800 for the suspension kit and spring, rm600 for the new tyres, and rm400 for the exhaust. Total only 2k+ already nice nice my car ^^.

the car wont move even after i press the pedal, then i will have to wait for a few minutes and let the engine heat up a bit 1st..this happen every morning or if i din drive my car for a few hours

guys, the part i pointed in the pic, is that our wira fuel tank?
just wanna confirm, thanks

[attachmentid=1182396]