At stock 3.2ghz?? Stock voltage for phenom 955 is 1.35v.

It is much better if you set it manually in bios. Try 1.34v for a start. Test stability using prime95.

If stable then try 1.33v. Do all over again until you find the lowest stable vcore.

---

Added on August 2, 2011, 11:22 pmThat is weird. Have you oc the nb?? And is it just me or the ht link seems low.


This post has been edited by haziqk10: Aug 2 2011, 11:22 PM

increase your vcore a little maybe ........

It is better to format your hdd to avoid any conflict..

Is it stable before you change your mobo??

Is it idle temp or load temp??

Your temp is definitely high for a cooler like d14. Take mine for example.
I'm using Venomous-X + scythe gt in non-a/c room oc to 3.8 @ 1.44v. Idle @ 36C (CPU temp), gaming @ 45C and load prime95 @ 53C.
Mine also an unlock version of phenom ii 550.

Your should be much lower considering only minor oc @ 1.344v. How about your casing airflow???

This post has been edited by haziqk10: Sep 24 2011, 10:18 PM

Amd recommend up until 1.425v and for me I personally would limit up to 1.45v.
It is the temp that we should be concerned for. I prefer my temp to be lower than 55c during load.

Mine oc moderate only. Many sifu here oc their proc pass 4ghz mark.

What is your temp during load?? Amd suggest below 62C.

Which one is the cpu temp??...you hv serious problem bro...90C!!!

If that is the cpu temp then you are way over the safe temp.
Even for the close case I think your temp are just 2C from AMD suggested temp.
Maybe you can try reseat your d14 or make sure that your case have a positive airflow.

sorry mistaken you with the other guy
How about share your cpu-z for the cpu and memory tab...also share you voltage here...

Lower the HT link to 2000mhz. The voltage that you need to increase is cpu-nb, not the nb.
Your voltage is quite high. Lower the voltage a little.