use HWmontor..
look at the TMpin#
when u load, the one that most sensitive to the load/idle might be the chip' temp..
but the reading might not be the same as core# reading..since its the mobo temp probe..

+1 to antonio

@cyborgR..
our chip might differ...but last time i used the ac64pro...
the temp not as high as urs when unlock...

3.6ghz vcore 1.376 x4 only 47 load..
that is from the mobo probe of biostar ta790gx 128... the probe quite accurate (compare with core# temp)

might want to enhance ur airflow..or anotnio suggestion

i think that "ES" is not more than just a name.. the mobo detect that way..
actually to get the unlock multi is based on pure luck i think..
to hit reset button.. ( u can skip the 1st L3 cache unlock..no need i think) then multi unlock..but only few reported succeed...

btw u can try hitting reset at cmos with ur board.. hope it will work

not anymore...but still cant drool me

"not to fugly" means the board still ugly leh..kekeke..just not too..

to unlock the multi of 710 is same as to unlock multi of the athlonII x2 to opteron.. same method suggested...and there are few mobo instead of asrock can do that..ECS is one of em..
ya..bit too much.. buy BE instead

if cant unlock...710 win there.. u have to take the risk

overclock u can proceed to AMD oc thread.. and read the 1st page...
so after u gain some knowledge, i can always ask sifu2 there..

no one willing to answer if u ask "how to oc"
so gather urself some knowledge 1st..and start ocing..after that u can always ask advance questions...

how about throwing away ur 550BE also..kekeke..get a thuban instead..or at least c3..kekeke..
lots of ppl already ditching their B50..kekekek

phenomII 555 la..c3 revision..
higher success rate?
depend on batch..but i think this early batch of 555 is worth trying..
but few cases with cores that not so healthy.. need extra vcore..

fundamental of unlocking
1-right hardware
2- right bios
3- enable ACC


additional things u need to know
1- batch?
2- u need unleash mode
3- what things u need to make it stable
4- accept teh truth ur core cant unlock/cant stable


wait..i posted crap

how about try
1 - increase vcore 2notch
2 - unleash mode
3 - reboot
4 -acc
and reboot...im not sure...ask antonio..i nver play with ahsus before..just search over the web

try with stability then...

what chipset eh? 600 series cant i think... u may have more luck if with 780/980

add nvidia chipset 780 and 980 too... but not too promising..

@5564321
budget?
i suggest biostar ta790gx here...

@mako
u have a deneb core..

tried the sequence i posted? if cant x4..unless u can make it x3 + L3

@rexio
how come u said cant tahan? regor chip is sooo cool.. proven by sifu ah_khoo.. it can run 1.5vcore with low temp (consider low for that vcore)

if u want to do more task, then ill recommend 555BE..so far i saw 1003 can unlock... few reported success..

kekeke..even u not running it 24/7..still it will be laggy..
how about go buy athlonII x4 with deneb core... if u cant unlock,at least u still have a quad rather then taking risk by going to 555BE..

large stress more to ram.. y dont blend?

@dreaming
basically.. large will stress out ram and NB (abit i think)
small will stress CPU
but blend will stress all.. to ensure the stability, use blend and it is harder then the other 2.
even u pass 1hr large, then u pass 1hr small... does not guaranty u will pass blend..

both u can put any number u want.. but HT link have no effect on performance..so any number that not hinder the mileage shud be ok..

but NB freq the higher the better..ofkos it have its optimum value for CPU speed vs NB freq.. but the main idea is higher is better...with deneb c2, 2.6ghz not a problem with stock vnb..the c3 i donno..2.8ghz?

4ghz with 2.0ghz NB is slower than 4.0ghz with 2.8ghz NB

the idea is like bottlenecking the cpu speed..

this is CPU-NB..the IMC...not the mobo NB..that NB no need leh.. unless u use IGP..kekeke..oc the IGP