fully compatible with LC135 dun worry.
i need to know koz i need to type in the receipt.

ORAIT...I'LL PM U WHEN THE ITEM HAS RECIEVE...THANX AGAIN BRO RON.

i have just sent out ur order.
inside got also the amal tape for the insulation on the other end of stromberg after u fix in the bike and 2 cable ties for u to avoid the stromberg from touching metal part.

this item can be used on honda wave 125

intelxtreme,
yes, can. same price.

1st Tank of fuel average 1 liter of Esso Ron95 = 32.31KM (3.09 liter per 100KM)
2nd Tank of fuel average 1 liter of Esso Ron95 = 32.26KM (3.10 liter per 100KM)
my average 1 liter of fuel = 32.17KM (min being 29, max 35, 90% of the past records are Ron97 and 10% are Ron95, frankly ron 95 or 97 no mileage difference to me.)
(monitored since bike purchased in June 2008 till now. usage of every tank is recorded. now bike mileage is 12K)

More on the Bike:
Modenas Elegant
150cc Liquid Cooled
Auto transmission
engine oil= silkolene, change every 3k
last oil change was about 1500km earlier.
no modification other than stromberg, everything stock standard, no givi box.

Riding pattern:
80% highway (NPE, usually going 90-100KM/h)
20% downtown KL
daily travel about 40KM

about rider:
Male 70-72kg

Cargo:
1 full set rain gear + working bag (2-3kg).

Changes after installed Stromberg:
didnt feel much different other than slightly smoother acceleration, and engine feels slightly lighter at my normal cruising speed (100km/h).
*top speed increased from 115 to 125km/h, tested on straight flat road and no\minimal wind (mind you, not all bike will experience top speed increase).
*before this engine can only reach red line and refuse to go further, after stromberg the engine manage to go another 500RPM into red, thus the top speed increase.
no change in engine temperature pattern.

will update more after 2nd tank of fuel

This post has been edited by sodifhas: Dec 9 2009, 09:23 AM

sodifhas,
u share the experience with ur fren surely they might interested. sell them rm139 then u untung lor.

Best regards,
Ron

Ron, i dont have biker frens, i m the only 1 in my gang hehehe...

aiiyooo... my products can suitable for cars oso mar.

wait... let me try out on the bike before budget for the car, take it slow ya...

i mean ur fren'z cars ler

it will go into my car 1st before my friends.

besides, i hardly got fren who like to pop the hood.

u buy and let them try for 1 day. afterthat, take it off. then they will hate their car.

ron,how to ensure it will be waterproof?...coz i'm using modenas elegan as well...

exoyie,
it is not 100% waterprove but i will insulate it with EPR tape.

can u plz pm me the pic of the Stromberg Power Booster(Germany),+Quadcore™ 10.0mm High Performance Plug Cable(USA)+ NGK Plug Cap (Japan)+Barnier B50 self-Amalgamating Insulating EPR Tape?...i'm really interested in buying...i need to know this coz some of my frenz do have probs in terms of it being penetrated by moisture..

exoyie,
Thanks for your support.
I have already sent out your order today. You should be able to get it by tomorrow noon.
You will have to do the insulation by your self after installation. The EPR tape is in the box.

Best regards,
Ron

thanx,bro...can't wait to have it tested...anther thing,can u plz show me how t fix it into my bike?

wats ur bike? u know where the location of spark plug?

i'm using modenas elegan,bro..not sure where the location is..but need to find info in terms of insulating it